GPBox Posted May 20, 2018 Share Posted May 20, 2018 ...after a great run our this morning, heading to garage to fill up....someone drives into the back of my 7 !...impacted on left Fog light/Reverse light...dented in the rear panel around the light....Will call insurance tomorrow....hopefully I can decide where it goes....want it knocked-out vs filled...any advice out there ? thanks Graham Link to comment Share on other sites More sharing options...
Member Jonathan Kay Posted May 20, 2018 Member Share Posted May 20, 2018 If you don't get an answer here I suggest contacting Peter at SPY Motorsport in Berinsfield and asking who they use/recommend.Jonathan Link to comment Share on other sites More sharing options...
Wrightpayne Posted May 20, 2018 Share Posted May 20, 2018 That will need a new back panel - off to arch or Caterham for the best job. Will need welding too.Ian Link to comment Share on other sites More sharing options...
Jim 123 Posted May 20, 2018 Share Posted May 20, 2018 I'd take Ian's advice. Lot's of repairers will take on the job, but they will not have the staff who can fix the rear panel. Best to avoid mistakenly accepting a nice visual job with lots of hidden filler under the paint that will not be durable. Link to comment Share on other sites More sharing options...
The_ASH Posted May 20, 2018 Share Posted May 20, 2018 I believe PT Sportscars in Maidenhead can do panel repair/replacement themselves and have access to someone who does some of the best paintwork I’ve ever seen on a Seven. Link to comment Share on other sites More sharing options...
Tazio Posted May 20, 2018 Share Posted May 20, 2018 Agree with Ian, Arch is the way to go, they could probably put a new panel on during the day, if you helped take wings off etc, it's part of their bread and butter work repairing racers. Link to comment Share on other sites More sharing options...
Area Representative Golf Juliet Tango Posted May 21, 2018 Area Representative Share Posted May 21, 2018 Huntington is not so far away. Link to comment Share on other sites More sharing options...
GPBox Posted May 21, 2018 Author Share Posted May 21, 2018 Thanks all, fully agree, new panel needed....been contacted by a few places from FB page..should be good to get sorted soon., Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now