Dash switch connectors

[mcerbm]

what type of connector is used for the old style dash switches?

I want to make a manual coolant fan switch and I was going to use the heater fan switch (i have no heater). I have the 5 pin plastic block that fits onto the back of the switch but I dont know where to get the bullet type sockets to be crimped onto the wires and inserted in the block.

[K7 VCT]

Kitcardirect.Co. uk sell the switches perhaps they can advise

[Jonathan Kay]

Can you add a photo of the bit you've got?

Jonathan

[mcerbm]

Ok found them on the car builder solutions

https://www.carbuildersolutions.com/en/iva-rocker-switch-terminals

[Ian Mackenzie]

And here: https://www.merlinmotorsport.co.uk/p/d-plug-wire-connector-for-rocker-switch-rs-dplug 

[Stridey]

I find it really useful to have a dash light that comes on when either my fan override switch is activated, or when the fan comes on normally. It helps me keep tabs that it’s coming on in traffic and off again when moving for a while. 

If your using a spare rocker switch or space, I wonder if that can be wired using a lighted switch,which would normally be lit when headlights are on?

My light is a yellow light between the main gauges.