blueyedbiker Posted February 21, 2018 Share Posted February 21, 2018 Afternoon all, any thoughts on potential advantages (or otherwise) of sealing the open ends of the wing stays with mastic to prevent water ingress? Ta. Link to comment Share on other sites More sharing options...
TomB Posted February 21, 2018 Share Posted February 21, 2018 Ive just removed mine to replace with lowered, and was very surprised to see how much rusty water came out when on the garage floor. Interested in the responses. Link to comment Share on other sites More sharing options...
Wrightpayne Posted February 21, 2018 Share Posted February 21, 2018 mine had water in them when I took off for re-powdercoating.You'd need to ensure they were completely dry before plugging.Ian Link to comment Share on other sites More sharing options...
TomB Posted February 21, 2018 Share Posted February 21, 2018 Im fitting brand new lowered stays, so will be dry, Ill probably just look to plug with sealant when I glue the wings back on Link to comment Share on other sites More sharing options...
blueyedbiker Posted February 21, 2018 Author Share Posted February 21, 2018 I am considering drilling a small weep hole down the bottom. Link to comment Share on other sites More sharing options...
Jim 123 Posted February 21, 2018 Share Posted February 21, 2018 I flooded the interiors of mine with a flexible cavity wax, but left the ends open. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now