Jump to content
Click here if you are having website access problems ×

Duratech 175 to 210


Alan Reeves

Recommended Posts

I am changing the cams and springs on the 175 plus a re flash of the ECU 

i need to change injectors and a little confused as to what I should use. One would assume the injectors from the engine All brand new unused ) that the cam/springs are coming from. 

But CC have told me differently and they should know but...any views would be helpful.

 

my new ( orange ) injectors are 0-280-156-156 – 170.2g/min flow rate.

the ones from the 420/210 ( black with blue sealing rubbers)     are    0-280-156-154 – 150.2g/min flow rate.

 

alan

 

 

 

Link to comment
Share on other sites

John, i went to CC and these are what they say I should have. I was trying to ensure I had the right parts to take to Andy...

Simon, do the injectors have blue bodies or just blue O rings ?

My assumption would have been the injectors of the new 420 should be the ones for me...but CC say there is a difference in the engines for a 2011 v a new 2017 ?

Peter, ta for msg I should have thought of him.

 

alan

Link to comment
Share on other sites

well the end of the story is that I have changed the orange ones for blue ones albeit both are in the same parts bin in CC.

Thanks to Tony at CC a font of info that tends to end up over my head and thanks to Mick Attree as ever for his knowledge and of course all who chipped in...

Now down to PGM to install

alan

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
×
×
  • Create New...