blueyedbiker Posted October 12, 2017 Share Posted October 12, 2017 Afternoon all, some while ago I inherited a boxful of 7 bits including a Magneti Marelli starter motor type M79 (0.9). It fits the X Flow bellhousing inasmuch that the bolt holes line up so any suggestions as to ascertaining whether it's correct with respect to such things as pinion teeth pitch, pinion throw, direction of rotation etc? It's unused so it'd be nice to save the £200 odd quid on buying new (this one's unused) but if it comes to that, any thoughts on the Edge gear reduction starter from Burton's, Cat no CF003/9H, or alternatives?Also in the box is a used alternator so any suggestions to check if it works or not without access to voltmeters or other test kits?Ta. Link to comment Share on other sites More sharing options...
Member Jonathan Kay Posted October 12, 2017 Member Share Posted October 12, 2017 Also in the box is a used alternator so any suggestions to check if it works or not without access to voltmeters or other test kits?You could: Fit it fully and see if the ignition warning light behaves normally, or Take it into into a local repair shop and ask them to test it.JonathanPS: Recommended multimeter... second most cost-effective accessory for 7s. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now