Moggie Posted August 6, 2016 Share Posted August 6, 2016 Hi all, I'm replacing my indicator mounts following a collision with Bambi. In order to pull the wires through the metal arm I need to detach the wire pins from the plastic connectors. Can these just be pulled out or is there a proper technique? Thanks Link to comment Share on other sites More sharing options...
ScottR400D Posted August 6, 2016 Share Posted August 6, 2016 If they're the same as mine, separate the plug and release each wire by using a small screwdriver to release the plastic tag that holds the wire in place. Quite easy to see if you look closely at the plug from the connecting side, if you see what I mean. Link to comment Share on other sites More sharing options...
JNC Posted August 6, 2016 Share Posted August 6, 2016 Take some photos before you part the wires to aid reassembly Link to comment Share on other sites More sharing options...
Area Representative paul richards Posted August 6, 2016 Area Representative Share Posted August 6, 2016 You'll need to remove the yellow plastic bit to access the pins. Small screwdriver releases a barb on the pinand allows pin to be removed. Easy once you get the hang of it. Link to comment Share on other sites More sharing options...
Moggie Posted August 7, 2016 Author Share Posted August 7, 2016 Thank you for the advice, very simple once I knew how. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now