Cookie Monster Posted July 3, 2016 Share Posted July 3, 2016 Thinking of changing to one of these but have two questions:How do they fit to the car? Does it matter that the car has poppers already fitted to the body cause a problem with fitting? Thanks. Link to comment Share on other sites More sharing options...
ECR Posted July 3, 2016 Share Posted July 3, 2016 If its the Caterham offering you're talking about, There are 2 square section tubes (one for each side) that run from under the outer seat belt fastening area to the rear fastening point of the roll over bar rear legs. These have 2 areas on each tube for the (3) boot panels to fasten to. The panels themselves have stainless u pieces fastened to their rear edges and these clip under the top rail of the rear chassis. I don't think that pre existing poppers will cause a problem. Link to comment Share on other sites More sharing options...
7 wonders of the world Posted July 3, 2016 Share Posted July 3, 2016 only cosmetically,If you need a photo of all the bits - which are beautifully made by Arch, please BM your email as I have a full set in the garage for the rebuild. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now