Phil G Posted May 2, 2016 Share Posted May 2, 2016 Has anyone changed their honeycomb boot floor to one that: a] Fits! b] Doesn’t let water in? Link to comment Share on other sites More sharing options...
SM25T Posted May 2, 2016 Share Posted May 2, 2016 Surely the gaps round the edge are to let water out !! Link to comment Share on other sites More sharing options...
DJ. Posted May 2, 2016 Share Posted May 2, 2016 I'd be surprised if the water is coming up from below. I've always found the boot cover let's it in around the roll bar supports. Also, if you have carpet fitted to the side skin, the boot floor fits quite well up to this (on my metric chassis anyway). Link to comment Share on other sites More sharing options...
CharlesElliott Posted May 2, 2016 Share Posted May 2, 2016 Seal round the outside of it with mastic..... Link to comment Share on other sites More sharing options...
7 wonders of the world Posted May 2, 2016 Share Posted May 2, 2016 Has anyone got either or both pieces of the fllor out that could draw round them please as I looking for templates in order to have some made up in di bond - plastic sheet with ally sheet either side,Happy to cover postage etc,Thanks Link to comment Share on other sites More sharing options...
Silver Machine Posted May 2, 2016 Share Posted May 2, 2016 Been through some extreme downpours over the years and would agree that water in the boot seems to come from the space round the roll bar supports. Found that a piece of roll bar foam fitted to the bars inside the boot can help but not eliminate the problem. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now