Cookie Monster Posted March 13, 2016 Share Posted March 13, 2016 Got a set of the above coming from John.How have others fitted them apart from riveting?Can they be securely fixed by using a thin application of Sikaflex at various points?Thanks Link to comment Share on other sites More sharing options...
Markiebabes Posted March 13, 2016 Share Posted March 13, 2016 Phil I think John (Bio) did his with sikaflex Link to comment Share on other sites More sharing options...
Cookie Monster Posted March 13, 2016 Author Share Posted March 13, 2016 Thx Mark Link to comment Share on other sites More sharing options...
John Vine Posted March 14, 2016 Share Posted March 14, 2016 What style of nearside rear wing do you have? That is, does it have the "step" cut-out for the exhaust? If not, you'll need to work out the best way to align the bottom edge of the guard (unless Jon is now getting these things made to the new step-less shape). Related discussion here from when I fitted mine. (Small edit to remove ambiguity.)JV Link to comment Share on other sites More sharing options...
Cookie Monster Posted March 14, 2016 Author Share Posted March 14, 2016 Thanks for the link JV Link to comment Share on other sites More sharing options...
alan c Posted March 14, 2016 Share Posted March 14, 2016 I used a small amount of silicone and some small dome headed bolts, think it was 6 or 8 per side. I wanted a solution that made it easy to remove/replace them in due course. Mine have been on the car a few years now and are just beginning to show some signs of wear.Make sure you seal any old rivet holes that are hidden behind the carbon or water etc will get in behind.Alan Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now