whatsup Posted June 15, 2015 Share Posted June 15, 2015 Hi am looking for a diagram of the pin layout of the eu3 engine loom. i have an adapter from the eu3 engine loom to the 36pin connector on my emerald a coule of wires have broken off the eu3 plun and need the nub layout to reconnect anyone know where one might exist out there. thanks in advance frank Link to comment Share on other sites More sharing options...
Member Jonathan Kay Posted June 15, 2015 Member Share Posted June 15, 2015 revilla's excellent analysis and diagrams are now in the Guides. I think he's also done parts lists and sources that will help.Jonathan Link to comment Share on other sites More sharing options...
Mankee Posted June 15, 2015 Share Posted June 15, 2015 Hi Frank. You could also take a look at Myles' guide on the Emerald's EU2/EU3 converters. Keep clicking through the pages and there is an Excel spreadsheet with the pins mapped out:http://www.alcester-racing-sevens.com/mapping_the_converter.htm(Not had the need to check the information as I am EU2 and can just plug the Emerald into my loom.) Link to comment Share on other sites More sharing options...
whatsup Posted June 15, 2015 Author Share Posted June 15, 2015 thks Link to comment Share on other sites More sharing options...
revilla Posted June 16, 2015 Share Posted June 16, 2015 @Jonathan - You best me to it! @whatsup - Let me know if there's any more info you need Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now