Jump to content
Click here if you are having website access problems ×

Another newbie question, jack?


Stridey

Recommended Posts

  • Member

Here's how I did mine, copying a photo which was in the archives.:

  1. Find a nice place for the jack (mine's a factory scissor jack but this should work with others) on the horizontal section of aluminium in front of the heater.
  2. Drill through the base plate of the jack.
  3. Drill through the aluminium section.
  4. Put rubber well nuts in the section from above, and machine screws down through the holes in the jack into those nuts.

Jonathan

 

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
×
×
  • Create New...