Culminator Posted January 1, 2015 Share Posted January 1, 2015 a quick and probably silly question about Padded Tillet seat inserts. How are they attached? Do you stick Velcro to the underside of the seat and food the insert under? Link to comment Share on other sites More sharing options...
BenF Posted January 1, 2015 Share Posted January 1, 2015 Yes, exactly. A bit of sticky velcro under the leading edge of the seat, then a bit on the back just below the holes for the belts and also (if you like) a bit of of sticky velcro in the base of the seat Link to comment Share on other sites More sharing options...
Dorset7 Posted January 1, 2015 Share Posted January 1, 2015 The seat pad has velcro fitted at the top and bottom edge. You stick self adhesive velcro to the underside of the leading edge of the seat and on the back and attach. I also have a section of Velcro fitted where the small of your back will be for extra security. Hope that's helpful? Link to comment Share on other sites More sharing options...
Dorset7 Posted January 1, 2015 Share Posted January 1, 2015 Ben - SNAP! (great minds eh!?) Link to comment Share on other sites More sharing options...
Culminator Posted January 1, 2015 Author Share Posted January 1, 2015 Sorted! Thanks chaps and happy New Year to you both, cheers, Mike. Link to comment Share on other sites More sharing options...
RS2000 Posted January 2, 2015 Share Posted January 2, 2015 This is my Tillet insert, a section of laminate floor underlay/foam dampening. Is quite effective at keeping the chill off my back and derriere! It is not fixed in any way but holds itself in place ok.Just an idea if you don't have a proper insert yet Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now