elie boone Posted March 12, 2013 Share Posted March 12, 2013 I need half shafts for my English axle, it needs to withstand 250bhp so should i go for fully floating or semi floating ? BTW Phil ( R&R ) is on holiday. Diff will have plate LSD. Link to comment Share on other sites More sharing options...
7 wonders of the world Posted March 12, 2013 Share Posted March 12, 2013 Steve at SPC does some very nice English axle conversions SPC Linky Give Steve a call Link to comment Share on other sites More sharing options...
elie boone Posted March 13, 2013 Author Share Posted March 13, 2013 I only need halfshafts that are strong enough, the full floating are much cheaper but are they strong enough ? Link to comment Share on other sites More sharing options...
7 wonders of the world Posted March 13, 2013 Share Posted March 13, 2013 If your running standard English casing then the shafts are semi floating, rally spec Atlas casings used 3/4 or fully floating shafts to manged the additioanl impact loadings. Dan Jones ex of Tran X should be able to help you with shafts 3J Driveline and shaft linky Grp 1 English shafts Edited by - 7 wonders of the world on 13 Mar 2013 20:05:43 Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now