rj Posted April 22, 2012 Share Posted April 22, 2012 Does anyone have one? (Spa mirrors, and the centre mirror is not the problem ) Link to comment Share on other sites More sharing options...
myothercarsa2cv Posted April 23, 2012 Share Posted April 23, 2012 Find a position for the RH mirror you're happy with, mark where the holes should go, drill. Easy as that! Could of M6 screws to hold them on, job done. If you stick a 10mm hole in the middle of the two fixing holes too, you can adjust the mirrors without taking them off. For the LH side, just put in the mirror image position. Put the screen on a block of wood to drill in to so as to stop it flapping about. Link to comment Share on other sites More sharing options...
JEM Posted April 23, 2012 Share Posted April 23, 2012 Before deciding where you are going to fit mirrors consider if you will fit a cage in the future. I fitted mine which were perfect position and then decided to fit a roadsport cage. O/s mirror is now in front of vertical pillar. ☹️ Link to comment Share on other sites More sharing options...
rj Posted April 23, 2012 Author Share Posted April 23, 2012 Quoting JEM: Before deciding where you are going to fit mirrors consider if you will fit a cage in the future. I fitted mine which were perfect position and then decided to fit a roadsport cage. O/s mirror is now in front of vertical pillar. ☹️ Good point! In the future am SLR cage will go on the car. Hence mirrors will have to come off anyway. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now