Member Jonathan Kay Posted June 11, 2016 Member Share Posted June 11, 2016 I'd like to put a fill hole in the lid and have seen a couple of posts where a threaded boss or nut has been welded on. Is that really necessary or would a hole with a blanking grommet in achieve the same? The lid has a small breather hole in anyway.If you fill from the top how are you thinking of getting the level right? Dipstick or existing side orifice?Jonathan Link to comment Share on other sites More sharing options...
Paul Deslandes Posted June 11, 2016 Share Posted June 11, 2016 I've had a blocker bar spring break. Can't imaging how as they are under zero strain and just hold the blocker bars in place (or not). Link to comment Share on other sites More sharing options...
7 wonders of the world Posted June 11, 2016 Share Posted June 11, 2016 Here I am piping up....... Speak to Steve @ SP Components, he has a proven design on his own Tracsport gearkit in either helical or straight cut.you wont find a better boxes, components or honest knowledge out there,http://www.tracsport.com/ and if your in the market for an LSD................ he can sort that to as his own Tracsport ones are now in stock - blows the likes of 3J and Titan into the water ! Link to comment Share on other sites More sharing options...
BlackSeven Posted June 11, 2016 Share Posted June 11, 2016 Tracsport is the way to go and well worth the initial investment. I'm absolutely loving mine.Rob Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now