Jump to content
Click here if you are having website access problems ×

A bit of a clearout


BlackBart

Recommended Posts

Stormforce outdoor cover vgc £90 including carry bag

 

4 into 1 long big bore s/s exhaust collector £85 sizes below

inlets 46mm OD 44mm ID, outlet 62mm OD 59mm ID, 600mm o/a length

 

4 into 1 short collector £50 sizes below

inlets 43mm OD 41mm ID, outlet 50mm OD 48mm ID, 230mm o/a length

 

Tonneau cover flat no pockets for headrests, poppers fitted including flap for petty strut £25

 

All above now INCLUDE packaging & carriage

I can send photos of any of the items if required

Priced to clear as moving soon

 

Graham

 

 

 

 

Edited by - blackbart on 17 Jan 2012 19:14:14

 

Edited by - blackbart on 19 Jan 2012 15:20:33

Link to comment
Share on other sites

If Colin doesn't want the heater, I'll have it whether it works or not. I'm only actually looking for the small plastic brackets attached to the casing, which secure it in the engine bay.

 

Anyone else got one of these brackets they don't want?

 

 

 

OZ

 

 

Link to comment
Share on other sites

  • 3 weeks later...
  • 4 weeks later...

I don't want to put the mockers on anyone selling off their surplus kit but if all you need is a couple of brackets for a heater isn't it easier to fabricate something than mess about with postage, dismanling and everything else?

 

Good luck selling though and as I say I don't want to detract from it, it's just a general observation.

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
×
×
  • Create New...