flaps7 Posted October 21, 2009 Share Posted October 21, 2009 Having unknowingly lost a bolt from inlet manifold holding carbs (cause of crappy tickover etc) I have struggled to find where to get such bolts. All other bits and bobs got but 'standard' bolts are not long enough. Can anyone help. TA Rick Link to comment Share on other sites More sharing options...
alextangent Posted October 21, 2009 Share Posted October 21, 2009 http://www.fastroadcars.co.uk may be able to supply. Or there are other Weber dealers out there as well. Alex McDonald Loud, louder, loudest... Link to comment Share on other sites More sharing options...
flaps7 Posted October 22, 2009 Author Share Posted October 22, 2009 Hi Alex Got everything from fastroadcars except the bl88dy bolts. The ones they supply are not the same length. I'll do a internet trawl. Rick Link to comment Share on other sites More sharing options...
Graham Sewell Posted October 23, 2009 Share Posted October 23, 2009 If they are the bolts holding the manifold to the engine, then just match the size/thread from Namrick. If you are refering to the studs that hold the carbs to the manifold, then maybe a stud pack will get you out of trouble. Cheers, Graham ------ Low tech luddite - xflow and proud! Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now