GordonW Posted July 29, 2009 Share Posted July 29, 2009 I've got a 'quick shift' lever for my type 9 box and want to swap it for the standard lever. I've never looked at the top of the box and have this image of taking the old lever off and having a load of springs fly past my ear never to be seen or assembled in the right order again. How easy is the swap? Any tips please? Thanks Gordon Link to comment Share on other sites More sharing options...
OliverSedlacek Posted July 29, 2009 Share Posted July 29, 2009 From memory, there isn't a problem with springs flying out. I think you need some new lock washers though. Link to comment Share on other sites More sharing options...
John Ryan Posted July 29, 2009 Share Posted July 29, 2009 IIRC just 3 bolts, no loose springs. Just make sure it is in neutral as it comes out, as I seem to remember it can be a fiddle to get the new one to engage. Again, I may be wrong but I seem to remember having to wind it down the last cm by doing up alternate bolts. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now