Nigel Fox Posted July 25, 2008 Share Posted July 25, 2008 Finally got a lap top to commission my camera system. System sparks up and displays DR2 DVR, but can't make it record. Will be taking it to Loton tomorrow, could any experts look me out and advise, car 135. Thanks Nigel. Link to comment Share on other sites More sharing options...
robmar Posted July 25, 2008 Share Posted July 25, 2008 Nigel - sure will do 143 ISTR Link to comment Share on other sites More sharing options...
robmar Posted July 25, 2008 Share Posted July 25, 2008 forgot to add try and get it charged over night as well Link to comment Share on other sites More sharing options...
Nigel Fox Posted July 25, 2008 Author Share Posted July 25, 2008 Rob, Will do, thanks. Link to comment Share on other sites More sharing options...
rgrigsby Posted July 25, 2008 Share Posted July 25, 2008 Nigel have you created a configuration file on a PC and saved it on the flash card? also maybe worth reformating the flash card in FAT32. Cheers Rob G www.SpeedySeven.com Link to comment Share on other sites More sharing options...
robmar Posted July 27, 2008 Share Posted July 27, 2008 rob - we tried nigels system but to no avail ☹️ we tried my card and config file as well as my bullet cam but we couldn't get it to work, it would intialise fine but then nothing would happen when pressing the red button. Nigel if you email me I will drop you my config file whihc I think should be the best setup Link to comment Share on other sites More sharing options...
rgrigsby Posted July 27, 2008 Share Posted July 27, 2008 Hmm ok if it's completly stuck let me know and I'll get it replaced. Rob G www.SpeedySeven.com Link to comment Share on other sites More sharing options...
Nigel Fox Posted July 28, 2008 Author Share Posted July 28, 2008 Rob (G); It's as Rob (M) explained, with his camera and card we were unable to get it to work, so it looks like there could be a problem with the box. I hadn't however configured my own card. I'm at Harewood on Sunday so I'll bring it along and we can decide what to do. Rob (M); Thanks for the help at Loton, could you send the file to n900fox@yahoo.co.uk Cheers, Nigel. Link to comment Share on other sites More sharing options...
robmar Posted July 30, 2008 Share Posted July 30, 2008 Nigel file is available at ipcam.ini rob Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now