Sandboy Posted May 11, 2008 Share Posted May 11, 2008 The following might be of use to someone and so stop me needing to move it because it's always on top of what I'm after! Heated windscreen in alloy finish plus stanchions, small stone chip down low on passenger side, sure it would repair, elbow grease needed on frame to remove flies. Hood and side doors, windows going a bit opaque but rest sound, hood sticks as well.- SOLD to Jingars Standard roll bar, padded but not covered, removed the previous cover, it was green! Offers 🤔 Edited by - Sandboy on 16 May 2008 07:57:51 Edited by - sandboy on 19 May 2008 13:21:28 Link to comment Share on other sites More sharing options...
Sandy Posted May 12, 2008 Share Posted May 12, 2008 Sandboy, Any idea what you want for the windscreen? I'm in Nottingham M1 J25 but could perhaps get a mate of mine to collect unless you know anyone that travels the M1? Editted to say I meant to PM - So, YHM Edited by - Sandy on 12 May 2008 19:45:25 Link to comment Share on other sites More sharing options...
jingars Posted May 13, 2008 Share Posted May 13, 2008 Sandyboy, You should have a BlatMail from me ref. hood and doors. Ah - just noticed you are a Sandboy, and not a Sandyboy - apologies. Edited by - jingars on 13 May 2008 11:29:23 Link to comment Share on other sites More sharing options...
JACK FLASH Posted May 13, 2008 Share Posted May 13, 2008 Sandyboy, Which type of rollover bar is it or for which type of chassis is it intended ? Jack Flash j.jackflash@hotmail.com Link to comment Share on other sites More sharing options...
chrisddl Posted May 13, 2008 Share Posted May 13, 2008 Sandboy, am also interested in the heated screen, so would like to know what sort of price you are asking for it. I assume it's not off an SV fatboy se7en. ChrisL Link to comment Share on other sites More sharing options...
Sandboy Posted May 13, 2008 Author Share Posted May 13, 2008 Thanks for interest guys Sandy/jingars, I have e-mailed you back. Jack flash, standard i.e. not fia, off a 94 de dion. ChrisL, from a std chassis, looking for £100 plus postage, they're £300-£400 from cc Link to comment Share on other sites More sharing options...
Sandboy Posted May 19, 2008 Author Share Posted May 19, 2008 *arrowup*Windscreen and roll bar still available Link to comment Share on other sites More sharing options...
JACK FLASH Posted May 19, 2008 Share Posted May 19, 2008 Sandboy, Unfortunately I think your rollover bar is too young for my car. To my knowledge in 1994 the 2 vertical tubes of the DD rollover bar were slightly under an angle. Correct ? I am looking for the type were the vertical tubes meet the horizontal tube under a 90° angle to use it as a starting point for a special rollover bar for my LA short cockpit. The type I am looking for was in use in the seventies and eighties, probably untill Caterham started with the K series in 1991. I hope I am expressing myself clearly. Could you check your rollover bar and give me feedback ? Jack Flash Link to comment Share on other sites More sharing options...
Sandy Posted May 19, 2008 Share Posted May 19, 2008 Sandboy, I mailed you last night but havent received a reply since? My previous offer still stands though Link to comment Share on other sites More sharing options...
Sandboy Posted May 19, 2008 Author Share Posted May 19, 2008 Jack Flash, I'll take plenty of photos tomorrow evening and hopefully they might help you determine if it's what your after. Sandy, Got your e-mail, no offense but i'll wait to see if a better offer comes along. Cheers Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now