John Vine Posted November 11, 2007 Share Posted November 11, 2007 Thanks, Cagey. JV Link to comment Share on other sites More sharing options...
CageyH Posted November 11, 2007 Share Posted November 11, 2007 The caterham Branded gauge is electrcal, and the gauge from Think is mechanical, so you need a new gauge. Only dead fish go with the flow....! Link to comment Share on other sites More sharing options...
Apothecary Posted November 11, 2007 Share Posted November 11, 2007 ..but it's well worth doing. There are a few photos of my Think mechanical gauge if you follow the link below Now DVA Powered SL No.174 Member No.109xx Pictures here Link to comment Share on other sites More sharing options...
Tom White Posted November 12, 2007 Share Posted November 12, 2007 I used a 5mm red high intensity led from a company called Kingbright. You need a 5mm led panel mount kit (two pieces) and a 1kohm series resistor. You can get led's with integrated resistors but I couldn't find any in high intensity format. Lastly make sure that you use a fused line for one side of the 12V supply. Tom Link to comment Share on other sites More sharing options...
John Vine Posted November 12, 2007 Share Posted November 12, 2007 Thanks Tom. JV Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now