Titan Duratec Dry Sump pan depth

[rgrigsby]

I don't suppose anyone has a Duratec Titan dry sump pan that they could measure the depth of? I'm interested to see how it compares with the Pace pan that I'm running at the moment.

 

Cheers

 

Rob G

www.SpeedySeven.com

[MikeE]

Rob

 

I have the Titan pan but don't know the depth, however I'm certain that the lowest point is actually the bellhousing not the sump so nothing to be gain in terms of ground clearance by changing sump pans?

 

cheers

 

 

 

R400 Duratec Build and Modification Pictures

here

[Dobuy]

Hi Rob,

Mike is correct the deepest part of the Titan sump is the bell housing base which is 7.5cm (as best I can measure). The front is less, however I can't give you an accurate measurement, as I have taken an angle grinder & file to the front half of the sump. I am running quite low ground clearance (5-6cm) and the track here has some nasty rumble strips.

At the front mounting bolts my sump is now 5.5cm, I guess I probably shaved about 0.8-1.0 cm off the front.

Picture here and here of pre-modified sump pan. If you look at the first picture, my modified one, has the front fins chamfered from the mid-pan outlet all the way to the base of the outside fin on the front edge

 

Dubai Duratec SV