Tony C Posted February 24, 2007 Share Posted February 24, 2007 I have just now powered-up the electrics for the first time after fitting a Duratec engine; the ECU came with the engine. I had my laptop connected to the ECU with the intention of introducing it to the Rover immobiliser and also saving a copy of the map. As soon as I switched on the IGN I got the following message:- THE ECU CONNECTED REQUIRES THE M3D CONTROL SOFTWARE VERSION 0.3 COMMUNICATIONS HAVE BEEN DISABLED. The ECU Serial Number is: 41641  The software I have on my laptop is M3D FOR WINDOWS VERSION 1.1 REV 5 I had a look at the Emerald website, but couldn't see any software downloads that looked appropriate. Any ideas? BRG Brooklands SV 😬 It seems that perfection is achieved not when there is nothing more to add, but when there is nothing more to take away. (Antoine de Saint-Exupery) Link to comment Share on other sites More sharing options...
Johnty Lyons Posted February 24, 2007 Share Posted February 24, 2007 Send ECU to Karl it need a firmware upgrade as the embedded s.ware is old hat. jj N.I. L7C AR. Membership No.3927. Link to comment Share on other sites More sharing options...
Tony C Posted February 24, 2007 Author Share Posted February 24, 2007 Just great  I hope that doesn't mean I'm going to lose the map. BRG Brooklands SV 😬 It seems that perfection is achieved not when there is nothing more to add, but when there is nothing more to take away. (Antoine de Saint-Exupery) Link to comment Share on other sites More sharing options...
Johnty Lyons Posted February 24, 2007 Share Posted February 24, 2007 No you wont The great God Karl will sort it 😬 Link to comment Share on other sites More sharing options...
Tony C Posted February 24, 2007 Author Share Posted February 24, 2007 He is a bit of a wizz, isn't he  BRG Brooklands SV 😬 It seems that perfection is achieved not when there is nothing more to add, but when there is nothing more to take away. (Antoine de Saint-Exupery) Link to comment Share on other sites More sharing options...
simonbell Posted February 25, 2007 Share Posted February 25, 2007 There were some tweaks for the duratecs.........control of the heated thermostat and voltage adjustment for the injectors Send it back to Karl and he should be able to sort it all out for you, might be worth enquiring about upgrading to the new release of the firmware as well. Simon Bell - Caterham 7 Duratec R I`ve seen the future.....and it`s powered by duratec Check out the website here Link to comment Share on other sites More sharing options...
CHRIS CLARK Posted February 25, 2007 Share Posted February 25, 2007 Tony C. Understatement!!!!! Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now