Sierra rear calipers? If so have you made sure the piston lug recess align correctly with the abutment on the pad? Also have you wound back the piston?
Over the next week or so I should have uploaded a lot more images as the build develops. The engine mounts are being powder coated. Should be ready to install the engine at the weekend into the rolling chassis. After that next step is measuring the propshaft for fabrication. Then Jack from Holeshot is planning to come round with a number of turbo options for trial install the objective of which is to arrive at an install that fits neatly inside the chassis panels. Fun and games. https://sites.google.com/site/caterham7hayabusabuild/home/building-engine-mounts
Anyone advise who can supply carbon front cycle wings? Carbon mods are not making these anymore and Ultimate Carbon have not replied to an email enquiry I sent. The MOG wings are carbon layered on glass fibre so not interested in those. Thanks
Eile, its not a wire identification issue. I know the exact details of wiring schematics.
It the pusle signal generated.. eg 0.5 pulse per rev, 4 cyl wasted spark, signal coil per cyl.
Does anyone know the details of the pulse signal type for the GEN 2 1340 hayabusa.
I am using the stock hayabusa ECU. The tacho out signal is Pin out 38 - had planned to use this.
I am having the std Caterham Tacho modified to suit the busa install and just the electrics side of the guage to sort now.
I have searched the pdf manual but no details on the tacho signal are apparent.
Are these the Tillet TR1 runners used to mount the B6 seat base to floor?
I need a 2x pairs of seat runners to fit Caterham tillet seats and want to check these will work.