-
Posts
645 -
Joined
-
Last visited
Content Type
Profiles
Forums
Blogs
Events
Blatmaps
Speed Championship Results
News
Website Help
Downloads
Gallery
Store
Posts posted by Apothecary
-
-
RS,
I have used sparkplugs.co.uk for these very plugs a couple of years ago. IIRC I ordered two sets for my previous car and they arrived as ordered very promptly at a very good price.
No recent experience of them.
CSR Superlight 260 in Mclaren Orange
Member No.109xx Pictures here
-
Can I just check if anyone knows if this model of nut YD-ANO34ALBK150 from the range of Ultralite nuts here is suitable for my 15inch black 10 spoke CC wheels on a CSR
I assume the CSR uses the same configuration as a DD axle car. I currently have the CC stainless nuts with the tapered end (again, I assume this is also standard 60deg ).
If anyone knows for certain that would be v. helpful.
Cheers,
Paul
CSR Superlight 260 in Mclaren Orange
Member No.109xx Pictures here
-
Quick update...
Caterham Midlands were very kindly able to check the map version in flash memory and update it to the latest while I waited (thanks again Bret ). Apparently I was running several versions out of date ❗ so its now upgraded to version F (or was it E )
I'm going to try this and see how it affects slow speed / around town driving before doing anything further. I'll report back at the weekend after the L2B run.
If I do go down an unlocked ECU route then I think it will be via the MBE simply because it appears as flexible / accessible (for my needs anyway) as the Emerald and its simply a swap over using the existing connector.
Cheers,
Paul
CSR Superlight 260 in Mclaren Orange
Member No.109xx Pictures here
-
Thanks again for these comments
Darren, Thanks for the Cosworth contact and I will give Andy a call. If that fails and I cannot get anywhere to unlock the ECU I might just do the same thing as you and get a 992.
You mention in your last post about the need for calibration maps - what are they and where did you get yours? (I note you have a CSR200).
Regards,
Paul
CSR Superlight 260 in Mclaren Orange
Member No.109xx Pictures here
-
Guy's, thanks for your comments.
I know the ECU is not at fault and its just the map. I think I have the latest version and don't have a big issue with 'kanagrooing' compared to what I have read elsewhere but I would like to be able to get a map specific to my engine (i.e. after a rolling road session). The MBE unit is a locked by Cosworth unit and I would like flexibility that something like an Emerald would provide.I had an Emerald on my last car (K Series) and it was really easy to tweak.
Darren, does your method give you complete control over the mapping (using the Easimap software I assume) comparable to an Emerald do you know?
If anyone has gone Emerald I would like to know how difficult it is to swap.
Paul
-
I'm thinking of swapping the locked MBE ECU in my CSR 260 for an Emerald so that I can adjust the mapping as and when I want to.
Has anyone gone down this route yet 🤔
If so, what is involved regarding fitting to the loom and is there anything I would need to consider regarding sensors 🤔
Paul
CSR Superlight 260 in Mclaren Orange
Member No.109xx Pictures here
-
Used but in excellent condition.
Having removed the nose cone badge from my new car its now for sale.
Its the 50th Anniversary ( Gold,Silver & Black ) badge which retails from CC at £17.63
All you would need is a new adhesive piece for the back.
Asking £10 incl P&P
Paul
-
Yes Stuart the TS housing is available.
Paul
No longer with DVA Powered SL
Member No.109xx Pictures here
-
-
Dave & David YHM (respectively)
Paul
-
Having now cleared through the garage I have the following available...
* Caterham branded air filter (foam) for K Series engine. Used but reasonable condition hence £5 Sold to David
* Used Inlet manifold (black plastic) for Rover 1.6 K Series (the one with the green manifold gasket) £20
* Thermostat Housing (used) for K Series engine plus spare Thermostat (88deg) £10
* Upper Steering Column (with fixed S'wheel Boss). Taken from my old Vauxhall Classic so not sure if it fits other models £5
* Caterham Branded Oil Pressure Gauge with Black face (used). I think this is for 05/2000 models onwards. Its the Caerbont model £15
*Oil Pressure Warning light (amber) for dash fitting £2 Sold to David
* Cam Shaft Pulley x2 (used). Came off my Superlight (1.6) when I swapped to Verniers. £10
* Fuel Injectors (used) x4. From my 1.6 K Series EU3 car. Part number appears to be 0280 155884. I think these retail for about £80 each new. Looking for £80 for all four
* Thermostat (used) race type (R500 spec which opens at 74deg) £2 Sold to David
* Front Wheel Bearing Kit (new) Pre 2003 cars £10 Sold to Davef
* Expansion Bottle Cap (new) for Rover £3 Sold to David
All the above plus P&P (unless collected from Bracknell)
Paul
No longer with DVA Powered SL
Member No.109xx Pictures here
Edited by - Apothecary on 29 Sep 2008 21:28:24
-
Sold to Shaun
Shaun, have received your email and YHM back
Paul
No longer with DVA Powered SL
Member No.109xx Pictures here
-
Last year I bought one of the excellent tyre racks as produced / coordinated by Dave Morris
see here
Used once only before I sold my Superlight, its in as new condition and is an extremely well executed and useful accessory if you do track days and want to take a spare set of wheels. Can also be used to carry luggage when touring.
Its suitable for a S3 chassis car with standard size FIA roll bar.
It has the capacity to carry two 6"x 13" rims (175/55) and two 8"x 13" rims (205/55) with tyres or four 195/50 x 15" wheels with tyres.
I'm looking for £90 inc postage (within UK)
No longer with DVA Powered SL
Member No.109xx Pictures here
-
Throttle and Clutch cables still available
-
Half hood provisionally sold.
Nick, You have first dibs on behalf of Stu (please ask him to blatmail me)
(Chris, 2nd dibs is yours if Stu does not want it)
Lights provisionally sold.
Dave, thanks for the email, YHM in return
Luggage rack
Steve (Bellissimmo), You have first dibs. Thanks for the mail and YHM also.
Regards
Paul
No longer with DVA Powered SL
Member No.109xx Pictures here
-
Having now sold my Superlight the garage could do with a clear out....
For sale therefore is the following (all prices plus P&P)
Throttle Cable - RHD Rover (brand new) £30 (currently £33.49 on the CC website).Still Available
Clutch Cable- RHD Rover - 1994 onwards (brand new) £20 (currently £24.68 on the CC website). Still Available
If your looking to carry a spare set (as I did) then I will sell the pair together for £45
Half Hood (Softbits for Sevens) Mk1 version in Black (used but as new condition and with outer case) fits car with FIA bar £90. Probably the best thing i ever bought (its actually the one on the SB47 website to illustrate how to fit one ) Sold to Stuart
Headlights (pair) 7inch in Black (good condition and glass not cracked or chipped) £45
Sold to Dave
Luggage rack (black) with straps (as new condition - used once only) £10
Sold to Steve
I will have a few other bits deep in the garage which I will post later.....
Paul
No longer with DVA Powered SL
Member No.109xx Pictures here
Edited by - apothecary on 21 Sep 2008 13:48:53
Edited by - apothecary on 22 Sep 2008 20:30:52
Edited by - apothecary on 22 Sep 2008 20:31:41
-
Ditto on the no-need-to- bleed.
Far more reliable than the standard gauge
Now DVA Powered SL No.174
Member No.109xx Pictures here
-
-
..but it's well worth doing. There are a few photos of my Think mechanical gauge if you follow the link below
Now DVA Powered SL No.174
Member No.109xx Pictures here
-
Shaun,
Not certain yet but maybe camping the night before rather than driving up early Monday.
Paul
Now DVA Powered SL No.174
Member No.109xx Pictures here
-
-
Hi Geoff,
I similarly dont seem to have received anything in confirmation. Have Blatmailed you
Paul
-
Counting on this being my 1st TD (form returned last week) so hope its not cancelled ☹️
-
CB - YHM back
Black wheel nuts
in TechTalk
Posted