-
Posts
10,648 -
Joined
-
Last visited
-
Days Won
2
Content Type
Profiles
Forums
Blogs
Events
Blatmaps
Speed Championship Results
News
Website Help
Downloads
Gallery
Store
Posts posted by SM25T
-
-
Must be loads on eBay or at a breakers.
-
The larger ones are the same bearing inner and outer. No felt seal either.
-
We had a L7C visit there this year. Fantastic company.
-
Crosthwaite and Gardiner at Buxted.
-
Did the filler cap and neck go ? Struggling to seal mine.
-
Basically forget searching for anything in new BC !
-
-
Empty estate car heading for Aalst and back over the weekend of 25th January.
Let me know if you want anything taking or bringing back
Ian
-
Closed. Sorted.
-
If the outer is OK .... use a bicycle inner cable with barrel nipple one end ... and a screw nipple the other. Total about £3
-
I'll take them for a friend. I am over your way next Saturday.
-
CC do stainless nuts .... certainly of the closed type. Work well with my anthracite 10-spoke alloys.
-
You can get them from a motor factor. Make sure you get one for VVC engine as it is an inch taller. Before purchasing , check primaries with engine running to see if two are cold. Swap coil packs over and see if you have moved the cold primaries over to the other two.
-
This is the company I used http://www.jwtransmissions.co.uk
-
You could buy another two helmet kits ...... plug, leads, speakers and boom mikes, then buy a couple of pairs of Peltor Optime 3 ear defenders from your local Arco ... and fit the kits to them. Easy enough. Need a hot melt glue gun.
I have done a few now. Happy to help if needed.
-
Can you make a round hole in the wall of the tunnel to access it .... then fit a rubber grommet to fill the hole ?
-
Good news. Richard's legacy lives on in his retirement.
-
I got my propshaft overhauled and balanced at a company in Bexleyheath. Several places around that do this sort of stuff. May end up with a better job than buying a new one !
-
In BlatChat ...... why yes, it appears you are
-
How about Shift+ARSE ? :-)
-
...... under the speed camera.
-
Austin A35 for racing I believe.
-
I expressed surprise when collecting a new style sender from CC Parts ..... they said to just use original connector at 90 degrees. Another example of product cheapening.
-
That's what Mic appears to suggest .... and he should know.
Front Wheel Bearings - Dust Caps?
in TechTalk
Posted
Sounds like old style standard bearings. I found these needed constant adjustment as the outer bearing is so tiny. They really should be greased and have a dust cover fitted to keep the grit and water out.
I upgraded to fatter stub shafts and sealed bearings for peace of mind ... and to get rid of that horrible felt seal ! Easy upgrade to fit !!
Old parts sell easily too