stuart147

Hi Delbert. We had just been up to the Ponderosa cafe. Brilliant day for a blat. Stuart and Sue

Blue with white stripe on Lichfield Street around 5.45 tonight, nice evening for it.

This morning around 9.15am at Dove Holes on the way to Castleton, aeroed two up. Not the best of weather at that point!

Hi Roger. Y.H.M.

Selling on behalf of my son. Trek Elite 8.6 (2014 model) Mountain Bike - 47cm (18.5in) in white/red/black. Fully maintained and in good condition - only ridden around 25 times! Photos available if interested via email. £500 before it goes on eBay. Son visits most places around the country through work so COULD deliver. Regards, Stuart

Hi Bob. I am no expert in coil packs but my 1.6 K Series has covered 45000 miles in 14 years and I have never had a problem with them. I very often cover mine up in the garage in September and never touch it until Mar/ April and it always starts first time. Stuart

Just had another look and no sign of any broken bolt in there. Almost certain now that the bolt is M10 x 50. I will ring Redline in the morning. Paul, I had just been looking at that mod from MG before you posted. Looks good but in 8 years of owning the car I have never had a problem with this before so figure just replacing the bolt will suffice. Stuart

Thanks for the replies. I can see the hole quite clearly so not sheared off thankfully. Looking at the front of the car, the bolt that is missing fits on the left hand side of the bracket. I wish I knew how to upload photos on here. There is a spacer around about an inch in length that goes in between the bracket and the engine . Stuart

Thanks Ian. I will ring them in the morning. Stuart

I have just discovered that there is a bolt missing from my alternator. It is on (well should be) the front of the alternator and looks like there is a spacer that goes in between the bracket and the block, at the other end of this bracket there is provision to slide the alternator up and down. I have found the spacer lying trapped in between the engine and the alternator. Would anyone know what size bolt I need to get? Stuart

Hi elie. I have looked there. The guy at Faulkners reckons that because they have been powder coated (by them in a non standard colour), the etching has been coated over. Stuart

Hi Ian. Thanks for the quick reply. Excuse the ignorance but that seems like quite a step change, they go up in 25lbs stages looking on Faulkners web site. Has it done the trick? Stuart

I have just had my front dampers serviced at Bilstein and just fitting the springs to them. When I last changed the front springs (due to powder coating accident), I fitted 8" long ones as supplied by Faulkners and they never quite seemed the right length. The adjusters are right at the top of the threaded part of the damper and offer no adjustment. If I lower the platforms even by a few threads, the spring is rattly loose, and when I jack the car up,as the wishbone lowers the spring becomes loose. I have spoken to Faulkners today and he says that going to a 9" spring would be O.K, but he wants to know what the spring rate is. It is not marked on the spring anywhere (possibly covered up when powder coated). Would it be 150lbs? Thanks in advance of replies. Stuart

Just thought I would post regarding my experience of Bilstein service. All I can say is how fantastic it is. I took my dampers over to them in Leicester a couple of weeks ago and fetched them back yesterday. To say that they look as good as new is an understatement. The guys in the service department have fantastic product knowledge and will answer any questions that you have regarding the work. Stuart

Yellow yesterday around 7.15pm going into Tesco.