Steve Day

Hi - I have a pal who is looking for a rear freestyle diffuser for a newly acquired Caterham. His details are; Paul Cardy - 07934466839 Thank you cheers Steve

Tonneau now sold - only the diffuser remaining... any offers? Cheers Steve

Wings and stays now sold. Cheers Steve

Wings and stays now sold. Cheers Steve

Price Drop as per my other advert - £150.00 Cheers must be useful to someone?

They have now Richard thanks!

Hi – I have a few parts still available; Front wishbones – Wide track set-up off of 1998 De-Dion S3 – lower left is slightly squiffy after nudge of Recticel at Prescott. It’s salvageable. (I fitted new to car on both sides before sale). This also includes nearside 13” wing stay. They are useable but could really do with rubbing down and painting, so they’re an ideal purchase for those long winters evenings coming up = £70 the set. Steering Rack (Quick rack 20%) – I replaced this too. This one is actually OK – there’s no grittiness in the action and the rods appear straight. £50.00 (Worth a look if you need one in a hurry!). Rear Diffuser – This is for the above car too – never fitted (it’s as new). If you’ve been reading the aero article in the Low Flying magazine you’ll know that sorting your aero out can make a difference. I was asked what this undertray actually does by another Caterham driver. So, I asked Simon McBeath (he of the aero article fame...) who said that they do make a difference if used with other devices. These devices would specifically include using a front splitter and undertray. So, if you’re looking at doing this it could help gain some extra advantage on any higher speed runs. £200.00 (offers?) Carbon Cycle Wings and Stays (13”) – apparently these have a diagonal weave pattern. They also have cut outs to drop the wing onto the stay more efficiently and this reduces the gap between the tyre and the wing – hence reducing drag (as I understand it!)... marvellous! They’re not perfect - £150.00 the pair (offers?) Caterham Tonneau Cover. Again this is from a 1998 S3 De-Dion. it has a section let in for a driver’s side high backed seat - with a low seat on the passenger side. So, it’s ideal if you’re out for a blat or on track on your own and don’t want the passenger section flapping around! I believe that the tonneau would suit a car with a standard roll-over bar. £40.00 I will post any of the above to UK mainland addresses (if you pay the courier charges). Or you can collect – 5 minutes from J15 M40. Text - M: zero 7836 38447 three Cheers Steve

Just to say these carbon cycle wings do include the wing stays... just in case that wasn’t clear? Price drop before I put them on flea bay to £250.00 and I will include 48 hour courier to mainland UK. cheers Steve

Blimey - good question. The wing stays are genuine Caterham I think the wings were also from Caterham. Although I don’t recall exactly and all of the receipts went when I sold the car. I’m not sure how I describe the weave pattern? Sorry to be obtuse but can you tell me what the differences are and I’ll tell you which ones these are - or I’ll take another detailed picture or send you the high res ones I already have if that’ll help? Cheers Steve

Pics - still available

Hi - I have a pair of S3 front 13 inch wing stays with unpainted carbon cycle wings fitted. They are in good condition. I’m based midlands- 5 mins from J15 M40 £275.00

Now Sold Cheers

Hi I have an unused rear diffuser and fitting kit. I believe it’s the freestyle one for an S3 chassis. Rarer than hen’s teeth. Look great and they work too. I am based near Warwick, 5 minutes J15 M40. £300.00 Cheers Steve zero 7836 38447 three

Hi I have a Quaife Reversing Box for Motorcycle Engine Gearbox Cars For Sale Little used - previously fitted to my Caterham - it’s in very good condition. The Quaife blurb follows: QBE35G was developed by Quaife to provide a reverse gear solution for motorcycle engined cars running an in-line powertrain installation To avoid unnecessary power loss, QBE35G has been designed to be a ‘straight-through’ type when running in ‘forward’ mode, therefore absorbing less power than conventional designs A compact, heavy duty unit, QBE35G features billet aluminium cases and uses readily available Ford English axle flanges Operated by a cable or other remote device via a short lever or optional longer lever (technical drawing at bottom of page), a Quaife breather bottle is also available as an option for QBE35G Key technical features of the QBE35G Quaife reversing differential unit include:-, • Designed for in-line use only, • Straight through design in forward mode to minimise power loss, • Uses billet aluminium cases, • Operated by short lever or optional longer lever (shown right), • Weight only 8kg £650.00 - massive saving on new price! Cheers Steve Zero 7836 38447 three

**Thanks For the interest - now sold * Hi Having sold my engine I have a rolling chassis for sale: Road registered Caterham Series 3 De-Dion Rolling Chassis – with V5 and MSA Logbook - pre-Cat Ideal base for competition or road-going Caterham – just fit your engine and gearbox and away you go! The car was full repainted 2017-18; the roll cage was re-powder coated plus the replacement carbon seat was fitted! Currently, all of the roadgoing ‘extras’ are removed in order to run in the ‘Mod Prod’ class, however, all of the items needed to run it as a road-going car are included in the sale including lights (headlamps/rear lights), wiring, plus larger fuel tank and spare seats and belts. Specification: Full Caterham MSA Certificated Roll-cage (Re-powder coated January 2018) Quantum Double Adjustable Shocks all round – (Rears brand new 2018, Fronts factory serviced 2018). SPC Twin Plate LSD (fitted brand new in August 2018) Caterham Carbon Fibre Tillet Seat Caterham Carbon Aeroscreen (full width) Caterham CSR Front Cycle Wings and Stays – new January 2019 Carbon Rear Wings Wheels – good condition Caterham 13 inch 10 spoke alloys (silver) will be fitted Dry Sump Oil tank 8 Litre bespoke Fuel tank, new fuel pump January 2018 Full Body Re-spray 2018 – Citroen Mango Orange New Front End December 2018 – including wishbones, all joints/fixings, new steering rack, new steering column, new detachable steering boss, roll bar bushes Carbon Nose Cone plus new GRP Caterham Nosecone Road registered with V5 – Q Plate (SORN) MSA Logbook In November 2018 a new ‘long’ front was fitted by Arch Motors. At the same time and to do a proper job, the front wishbones (both sides) and all of the steering joints, tie-bars, nuts and bolts, anti-roll bar bushes, the steering rack, steering column and detachable steering wheel boss were replaced. The front side panels have been repainted. So, the car looks absolutely spot on again – totally refreshed and gleaming – and an ideal base for your project. Fit your engine and gearbox and away you go! Offers based on: £11,500.00 Thanks for looking.