-
Posts
234 -
Joined
-
Last visited
Content Type
Profiles
Forums
Blogs
Events
Blatmaps
Speed Championship Results
News
Website Help
Downloads
Gallery
Store
Posts posted by richardm57
-
-
Hi all, My 7 was supplied as kit late 1987,
I wanted webbers but was told not available as all webber production was reverted to supplying replacements for all Fiesta BB carbs which were crap.
This was early 1988 so may have been 1987 also, so bought Dellorto"s.👈
At about 45,000 miles carbs started to leak onto battery🙈 It was the all metal needle valves leaking and overfilling float chambers.
For needle valves use the Viton seal type.
I would have though 45 perfect for 1700 bdr, i use 48s on 2ltr bdg.
Think i loose a bit of top end over webbers but smoother drive low end.
-
The problem with trunnions apart from servicing is that they BREAK where the flanges meet the wishbones, so check very carefully at his point for cracks at side of weld.
-
Hi, Jw gave me this tip a gazillion years ago you will need Mole Grips for this. Gently squeese together from side to side to take out all the slake.
-
This company is in the us.
http://www.blueskyracing.com/Prod4CastingHardware.htm#dowel%20studs
-
Have sent blatmail.
-
Hope this link works.
What do you all think.
-
Wanted engine mounting brackets for X/flow o/s needs to be for dry sumo pump also good Windscreen for s3. Post to Surrey if poss.
-
Hi All,
Which antifreeze for alloy block and brass radiator.
Thanks Richard.
-
Hi marcos is this the one i did not look any futher.
Richard
-
Bump
-
Hi John,
I need a021r to match what is on the car.
But thanks for posting.
Richard.
-
Wanted as above or 185x60x13. E marked.
Surrey area.
Thanks Richard.
-
-
-
-
-
-
Hi Nick,
Yes thanks been on that, there are lots to choose from.
Just have to get some luck from those places as i am sure there some real dogs as well.
Thanks Richard.
-
Hi All,
A nice young lady drove into the back of my car, and it is a total loss.
So i urgently need something to get around in.
Either a bangor about 1k or a mid size estate/hatchback about 5k.
The higher car goes back 7.April so need to get sorted very soon.
Please have a look in your garage to see if there is something suitable.
I am near Guildford so anything around this area would be good.
Do not really want to have to vist a dealer.
Thanks Richard.
-
Links in posts not working with Firfox (29 i think)
-
Thanks Richard
-
Could some kind person please tell me the thread on the presure line in rear caliper.
I did know but it seems to have been removed from my brain.
Thanks Richard
-
-
DeDion fit
Magneton Starter Solenoid Replacement
in TechTalk
Posted
Be very careful of exchange Magneton starters i had one from the people who took over from the supplier to Caterham Magnetron starter.
It had the wrong number of teeth on the pinion But also turned the Wrong way, as these where made for front wheel drive VAG cars.
Richard.