Pete-B

Sorry should have posted, now all sold.

Hi Trevor, I'll try and find out what the carriage cost would be to N/Ireland and let you know. Regards, Peter.

Hi, After having to sell my much missed Sigma 150, I've got some bits left I need to get rid of! 1. Oil Pressure sender with loom, CCs cost, £78 plus PP 1. Map Sensor, CCs cost, £95 plus PP i. Right Hand Engine Mount, CCs cost £78. 4x 1/2 Litre Fuchs Silkolene Hypoid Gear Oil £19 2x1 Litres Redline MTL 70w 80w GL4 gear oil, ( the favourite for our gearboxes) £28 Thats nearly £300 worth plus carriage. If someone wants to come along and give me £40 they can take the lot away. I'm in the Peterborough area!

I am an expert having spent over 25 years in the painting, metal spraying and shotblasting industry, the last 8 years as workshop manager. A lot of our work was for the MOD so standards were very high with regular checks and inspections. Under no condition would we powdercoat over existing paint work one simple reason being, the paint that is now lifting would have looked OK at some point, so the same thing could happen to rest in which case the new coting will come away with it. The way forward by us would have been to shotblast with medium grit ( bearing in mind we had huge pressure on tap) so I would have expected one of the lads to strip four wheels completly in less than 20 mins. The important thing then was no one should touch those wheels with their bare hands because that would contaminate the surface. They would then go to the paintshop to be sprayed and baked to the customers colour spec. Also if there was any lengthy time gap between shotblasting and painting the wheels would have been kept in a warm and dry area as any damp on the surface will cause future problems. We also guaranteed our work and always told our customers, in very unlikely event of a failure please come back and talk to us and we will resolve it. Our motto was no business can survive and prosper with customers spouting to all and sundry how bad you are.

Now sold

Hi,Mr L, YHM

I have Two,Thule 951 roof mounted bike carriers as new with all fittings and instructions these have been used just the once. I then changed the car for one which came with a fitted tow bar and I'm now able to use the tow bar bike carrier from our motorhome. Amazon have these at £63 pounds each I'll accept £50, (or offer) for the pair if someone wants to pick them up.

Blimey! Somebody give me 30 Quid for this lot then.

Come on, somebody give me 50 quid to cover the oil and I will throw the rest in. That's nearly £250s worth of parts for free. Edited by - Pete-B on 28 Jul 2012 19:28:23

No one going to make me a silly offer for this lot?

Hi, Having sold my Sigma 150 I have these bits for sale which are all new. 1 off oil pressure sender CCs price £78.00 plus PP. 1 off Map Sensor CCs price £84.40 plus PP R.H Engine Mount CCs price £78.00 plus PP Opie Oils. 4x 1/2 Litre Fuchs Silkolene Hypoid gear oil GL5 Opie price £19.16 plus PP 2x1 Litre Redline MTL 70w 80w GL4 (favourite gearbox oil) Opie price £31. 98 plus PP Retail price for all = £291 plus PP Someone make me a stupid offer to come and pick this lot up in one batch. I'm about 10 miles north of Peterborough. Edited by - Pete-B on 13 Jul 2012 10:49:48 Edited by - Pete-B on 28 Jul 2012 19:19:57

Hi, I want to double up and add a second like for like leisure battery in my motorhome. The problem is, both batteries only have one pair of posts and those on the original are taken up by the existing cables so how does one connect the two together. Probably a numpty question but thanks for any help.

Hi Ahmed, I'm not sure mate, you could ask CC I suppose for the definitive answer.

Brand new unused oil pressure sender for S3/SV and CSR including sub loom. CC price £78 plus P&P. To sell, £35 plus £3 P&P http://i1074.photobucket.com/albums/w404/Pete-B7/OilPressureSens.jpg Edited by - Pete-B on 28 May 2012 22:35:19

http://i1074.photobucket.com/albums/w404/Pete-B7/OilPressureSens.jpg Edited by - Pete-B on 28 May 2012 22:23:26