Duckpit

I want to knock out dents in sump on my 7. Can u take sump off with engine in situ ? if so how do u get at those 2 back bolts

Ta

Nick

Thanks guys, a new sender & hope for cooler weather

80 when stationery on the M25, but about 50 driving at about 80 down the M20 once it cools off shes down to about 40. i thought perhaps that heat was coming down the other pipe to the heater

Cheeers

Go to www.demon-tweeks.co.uk better selection - I have drilled my sy=tanchion to fit

😳

1700 X Flow, heater turned off, checked that on off valve is working. But frying round my legs am assuming its the heater -

Any Ideas ?

Tried to buy a new wiper blade for my 95 Xflow from Caterham. Only to be told that they no longer stock em & I need 2 new arms & blades at cowboy prices.

Anyone any idea where I can get an original blade from ?

Cheers

I have 1700 XFlow, can anyone tell me what sort of compression I should be getting. Currently ranging from 135psi to 150psi

Cheers

Nick

Thanks Steve, cat in bits, bush will be ordered in morning.

Thanks Nifty gave me a laugh at 1am

Nick

Its a 1700 Xflow live axle, so hopefully u r right, tried to give a frame a hard pull etc but appeared to tight as my misses.

Thanks

Weathers lovely - 7's Shiny - What is that horrible clonk in back end when I change gear ? It sounds expensive, any ideas ?

Cheers

:(]

Thanks - Definitely cable as pulled it out from casing - cant see how to unscrew from box

*mad*Just bought a Caterham 95 1700xflow - going so fast the speedo cable broke Lets see how to take it off - easy on the speedo but what the hell is going on at the gearbox - there does not seem to be an easy way to get it off - sure its easy but dont want to resort to bolt croppers - Thanks