julians

Just fitted the pista version to my caterham, works well, except that the steering wheel obscures the shift lights.

great bit of kit.

buy from graham at fluke motorsport

http://www.fluke-motorsport.com/

temp guage sold to Tony.

Oil pressure still available.

Simon,

Just got a failure on your email address, can you tell me the correct address for yourself.

Simon,

YHM back.

Sold to Simon.

Standard Caterham oil pressure and water temp guages.

£15 each

Blatmail if interested.

Black face, white numbers/lines, odo currently reads around 7500miles. Takes speed feed from any type of pulse input ( eg hall effect sensor or magnetic sensor), just tell it how many pulses per mile. It has a Scratch on the bezel.

£40

blatmail me if interested.

0-4000rpm in small scale, 4000-8000rpm in large scale. Black face, white numbers/lines. Green backlighting.

I think its an old ST400 model, and I beleive it will drive a shift light, and give a tell-tale of max rpm, but I dont have the manual and I've never used these features.

£70

Blatmail me if interested.

cheers for the info, I agree with you.

I know you cant use them on trackdays, you know you cant use them on trackdays, but the potential buyer might not.

now on ebay

http://cgi.ebay.co.uk/Aim-sports-MCL-LapTimer-plus-Beacon_W0QQitemZ8075279531QQcategoryZ43120QQssPageNameZWDVWQQrdZ1QQcmdZViewItem

Too expensive? or is it just that nobody wants one?

if you think its too pricey, make me an offer

Anyone know what the thread type is for an oil pressure sender on a 2.0 zetec of roughly 1994 vintage?

Ta

Aim MCL lap timer and beacon for sale . See http://www.dataspares.com/Laptimers.htm

£80

blatmail if interested

edited to correct error in URL.

Edited by - julians on 9 Jun 2006 18:11:25

I use 5w-30 semi synth in my 200bhp zetec and its fine, no problems at sustained high revs (eg trackdays). I did try a 0-40, 10-40, 10-50 etc etc, because various people told me that 5w-30 would be too thin for the state of tune the engine was it and they all caused rattling tappets after sustained high revs, the only oil out of all the ones I tried that didnt cause rattly tappets was the 5w-30.

This is on a fairly early zetec engine though (1994ish)

Could it be a buggered gearbox?

Have you tried turning the engine with someone sat in the car with the clutch pressed in.

Very off topic this, but I thought it might be worth a shot.

2001 Zodiac futura sport with yamaha 50hp outboard and a trailer for sale - £3500

http://www.zodiacmarineusa.com/boats/futura_sport.htm

Boat and engine are in excellent condition, engine is electric start , 2 stroke yamaha 50hp, the maximum allowed power for this boat. Will hit a GPS recorded speed of 40mph, will pull a skier/wakeboarder/tuber. Excellent for lake or inshore use or as a tender/toy on larger boat. I've owned it from new and used it for 2 weeks per year in the coastal waters off majorca. Its been stored on the trailer in a warehouse when not in use.

Comprises of:-

2001 zodiac futura sport

2001 yamaha 50hp electric start 2 stroke

centre console

ski hooks

fuel tank

Telescopic oars

Bow bag

boat cover

foot pump

roller trailer

Ie , everything you need. Boat is lying in Majorca,spain. Call me on 07973 753717 if interested or blatmail.

Edited by - julians on 19 Feb 2006 19:21:31

Got a recurring problem with the engine mounts on my car. Its zetec engined and it uses the raceline mounts. Problem is the left hand side mount always eventually cracks after a year or so. It cracks at the weld where the square section tubing meets the bracket that bolts to the engine.

Its not a major problem to replace, but I was wondering if anyone else suffers the same problem, or whether anyone has any ideas what might be causing it.

I'm onto the 4th replacement in 5 years. The car has a fairly hard life, being used mostly for trackdays, engine is probably putting out around 200bhp, and its driving through a regular AP clutch to a quaife straightcut type 9 box.

Which honda engine is it? S2000 or civic type R.

From your comment about 240hp I assume s2000?