jsb

I would just like to say many thanks to Stationary M25 Traveller. You have another convert and my car is now sold and will be coming back down south! John J5B SV

Dave, You picked some cr500s up from me for Nick about a year back I'm at Ellesmere John J5B SV

Thanks Roy

Many thanks photos and spec sent! John J5B SV

SV Spec March 2005 16800 miles Labrador Green/Silver band and stripe 1.8vvc with DVA upgrade April 2009,Omega forged pistons,Spuncast liners,Modes to conrods,Emerald ECU,Jenvey throttle bodies,Air box,Full port to cylinder head,Piper BP285H cams,VVC blanking kit,Piper valve springs,Steel caps, Vernier pulleys,EU2 injectors. Should be 200/220bhp not had final setup at Emerald . Silicon hoses New odyssey battery 2009 Full Power speed exhaust system 2008 6 Speed gear box refreshed by road and race April 2009 New clutch April 2009 LSD 4Point racing harness FIA roll bar Lowered driver's floor Nitron dampers 2008 13"x8" rear wheels 13"x6" front wheels ToyoR888 tyres as new 13"x6" spare wheel and tyre not used all new 2008 Wide track suspension Brake upgrade Full weather gear Heater Heated screen Aces shift lights £21995 Please mail for photos

I have decided to sell my SV, 1.8 DVA Power Engine. Details and photos to follow. John J5B SV

That could have been me on my way back to shropshire dark green (looks black) with silver band and stripe,nice weather but lots of slow moving traffic!! John J5B SV

Thanks, tested and it looks like the sender is us, new one on order Cheers John.

Help needed? Put the car away temperature spot on 80, gauge working fine. Been out today to Breakfast Club, gauge not working at all. anybody had the sender just go without notice, or do I need to look else where? Checked the wires, all seem OK. Just had a DVA upgrade to emerald ECU, Dave had to re do the loom, could this throw up problems? Cheers, John.

I have just paid £1250 for mine just re built by R&R, I decided not to go down the sequential route due to cost and some good feed back from blatchat John J5B SV

Thought it might be worth a try!! anyone got a tractor to sell? David Brown 880/990 Ford 4000 or similar I want it to run a log processor needs to be about 45hp and in tidy condition John J5B SV

Ruff severn YHM John J5B SV

Thanks Power Puff, I take it that it will be OK for my 1.8 vvc I am swaping to a 6 speed box and Geoff Wilcx suggested I fit a lightend fly at the same time, if it's OK then yes I will have it YHM John J5B SV

Thanks but I can't find it on ebay John J5B SV

Iam after a lightweight fly wheel for a K series any one got one to sell? John J5B SV