babymerc
-
Posts
114 -
Joined
-
Last visited
Content Type
Profiles
Forums
Blogs
Events
Blatmaps
Speed Championship Results
News
Website Help
Downloads
Gallery
Store
Everything posted by babymerc
-
Thanks James, got the car booked in with someone who is supposed to be a bit of a guru in this department on Saturday afternoon, so will let you know how I get on.
-
Thanks Derek. I retraced my steps, even replaced plugs with an old set which I gapped to 1mm. Replaced my coil which I had taken off (new one hasn't arrived), gave the crank sensor connection a wiggle and away she went!!, so don't know what the no start was, which is annoying, but still leaves me with a car that won't pass mot emissions.
-
Quick update. Had RAC out to it, he couldn't find the problem either. Couldn't interrogate ecu. He suggested trying another coil pack, which is coming tomorrow (even though the original one seems to check out ok)
-
Hi, thanks for that, I've cleaned that earth point. No bangs, cams are turning. I'm totally stumped
-
DW199 Thanks for that. I must admit it's something I never considered and probably would end up with a bunch of bent valves if the cambelt had snapped, but nevertheless a simple check which I'll look at. John
-
Hi Chris, not to my knowledge
-
Hi John, yes the plug was resting on the exhaust primary. What is now stumping me is I disconnected the connector to the coil and I'm getting 12v there so presumably should get a spark at the plugs?
-
All fuses check out OK, changed o2 sensor for 2nd hand one I had. No luck
-
Thanks for that Chris. Checking the fuses will be my last throw of the dice. Will do this morning. As for easymap interrogating the car would be ideal. John
-
Sorry John, the chap stopped and cancelled the test as soon as it failed emissions, so he didn't charge me. I should have been clearer on my first post
-
Hi, I'm in n.wales near mold John
-
Thanks for that James and Jonathan, but I'm quickly getting into the realms of "I'm not sure what I'm doing ". Might have to find a way of getting it to someone
-
I'm wondering if the initial cause for the off the scale emissions has finally given up
-
James, had the plug resting on the manifold. Where will I find 10 and 13?
-
James found the ground. Reading 0.4 ohm to engine block
-
Hi James, silly question but where would I find the ecu ground cable
-
Hi James, silly question but where would I find the ecu ground cable
-
Hi Jonathan, battery is brand new, turns over fine
-
hi all, having real trouble with my 270s. Took for mot which it failed miserably on emissions, over 9 on co2. Very reluctant to star recently. Changed battery today because the old one was getting tired. Now it won't start, turns over fine, removed spark plug and it was wet. Turned over with plug still removed and there was no spark. Really at my wits end now don't know what else to do. The car is standard self built by me in 2015/16. Any help, suggestions would be greatly appreciated. John
-
Thanks for your reply. It was indeed leaking from the core. It does seem strange that a more advanced antifreeze (oat) would damage ali, but I'm not an expert
-
Having taken my rad to North Wales Radiators, they informed me it was unrepairable . I am now the proud owner of a radtec radiator. After looking at several posts on here about various antifreeze to use, I phoned Darren at radtec. He informed me not to use oat antifreeze but use iat instead. Apparently oat doesn't like standing for any length of time. CC recommend oat. So consequently I'm totally confused. Any help gratefully received.
-
Thanks Steve, I'm in n.wales but nice to know it can be done
-
Just noticed water under rad on my 2016 270 sigma. Ran it up hoping it might be a hose clip, but no when up to temp it started steaming like a kettle. Are these Ali radiators repairable or am I going to have to bite the bullet
