Jonathan H

Try these people.

http://www.firwood.co.uk/webapp/wcs/stores/servlet/CategoryDisplay?langId=-1&storeId=10001&catalogId=10601&categoryId=12275

Jonathan

Roger, did you get chance to find the bracket and rubber pad?

Thanks

Jonathan

Jon, thanks for the link.

Roger, yes that would be great!

What will it cost me? 😳

Looking for one of those rubber lined U shaped brackets to stop the wiper motor flapping about. Please!

Cheers

Jonathan

Thanks Stu, I thought it would do.

Talking of "boot fools", why is the Ali sheet so much smaller than the ply board and what is it's purpose?

Cheers

Jonathan

Hi,

If you have the ali sheet for the boot fool, does it go under the ply board or on top?

Cheers

Jonathan

How many parts do you have? There is one that the tank sits on, the two square ones with the slot cut in fit behind the fog and reverse lights,with the slot lowermost to accommodate the wires. Also one is stuck on the end of the tank with Sikaflex, and one is fixed behind the number plate,on the inside of course.

I'm too slow!

Jonathan

Edited by - Jonathan H on 14 Jan 2012 15:00:13

Floor painting in this weather?

Get it Tarmaced!

Jonathan

Edited by - Jonathan H on 13 Jan 2012 17:59:19

Can someone tell me where this part fits and what is the difference between part

30T025A and 30T025B?

Apart from £10.

Thanks

Jonathan

Tacx cycle track turbo trainer.

£45 plus P&P or collect/GONADS.

New nose cone doesn't come with the cutout.

Hi, I will take the bonnet please.

YHM

Jonathan.

JEZ

BM sent.

Standard front 150lb 1.9 I/D , Please

Thanks

Oh no! the plot thickens.

I fitted 150lb 7" (190mm)long 1.9 I/D Faulkner springs on standard dampers and they compressed down to the bump stops!

Lee are your 8" springs 150lb.

Thanks

Edited by - Jonathan H on 15 Oct 2011 14:04:15

Hi,

Can someone tell me the open length of the 1.9 I/D standard rate front spring for a 2007 roadsport.

Thanks.

Mine doesn't leak yet.

Looking for the shorter of the two oil pipes, if anyone has any spares.

Preferably without grooves cut in by the alternator belt, as I have one of those

Thanks

Jonathan

2 Bilstein front shocks.

Are they standard or wide track and do you have a photo.

Cheers

Jonathan

Hi, you have mail Regarding the AVO front shocks.

Jonathan

Hi Bert

Could I have second dibs and can you send photos?

Jonathan

Looking for M0 rated front dampers for 2006 car.

Thanks

Yes Mankee, but it involves some machining.

I thought I would make something that looks better than a lump of hexagan

jetto, It's yours but I would measure up just to check first.

Thanks

jonathan