-
Posts
4,185 -
Joined
-
Last visited
Content Type
Profiles
Forums
Blogs
Events
Blatmaps
Speed Championship Results
News
Website Help
Downloads
Gallery
Store
Posts posted by jackb_ms
-
-
Hello
Did you get my e-mails with the pictures?
Jack
-
I have some various parts for a CC dry sump (purple) if you are interested.
Jack
-
I'm using the same stuff as Ezzer in my too box and to protect the bodywork when I work on my 21.
Jack
-
Hi All
About chargers, i have this one Youshiko YC4000 Intelligent AA AAA Professional.
It allows you to change the charging current, do a battery cahrge test, etc.
I would recommend it.
I am about reluctant to recommend the cheap stuff from 7day. I had quite a few of there batteries failed after a just a few month of use.
Jack
-
Hi all
I have some cooling issue with my current PC!
I have plenty of fan but cannot get the CPU temperature down enough so i can use it as it was suppose designed to be (gaming PC).
So I am looking for a full size tower, if you have one not too old collecting dust...
Jack
-
I don't have a trailer, howvere there is a company which is based in Sutton Courtenay / Didcot.
(Transporter is parked outside most evening)
Can get the phone number if interested.
Jack
-
Hello
Do you have an old tablet gathering dust somewhere?
Is the battery dead? Doesn't matter
I'm looking for a smallish tablet with a 64Gb micro SD card.
It only needs to run Android something.
Please l.et me know what you have
Cheers
Jack
-
Does your airbox already hav the cut out?
If yes I may be interested
Jack
-
we have one! it need a new saddle an tyres, but otherwise free
-
Hi Mark
It's a VVC with roller barrels and Emerald with some magic from DVA.
I make a trial fit at the weekend to see if the new shape gives more space and doesn't fouls the reservoir. I will take a couple of picture as well.
Jack
-
Hi Guys
Thank you for the giving me ideas.
I'm working on removing the step and creating a smooth curved.
To do that, I am using news paper and PVA glue instead of fiber glass and resin to test the modification of the air-box vs position of the reservoir and mouth of the trumpts.
The idea behind using news paper and PVA glue, is that it should be fragile enough to brake if it force upon the reservoir or the mouth and it is a lot easier to remove and start again
When I get the ideal position, i can then fiberglass the box shut
https://www.dropbox.com/s/3u9ti6h0v2hurbp/DSC_0440.JPG?dl=0
https://www.dropbox.com/s/rlz9b2ta6w4g9yn/DSC_0441.JPG?dl=0
Doesn't look very pretty but should work when finish
Jack
-
Hello All
The reservoir for the brake is in the way of the air box. I have modified the air box, how ever the mouth of the trumpet of cylinder 1 is slightly obstructed by the airbox modification.
By slightly, i mean about 5-6mm high and around 10mm from the mouth of the trumpet, it is more like a step.
The air box is a Autoteknix unit in GRP
I understand that it is not a ideal to have an obstruction
How much this obstruction is hurting cylinder 1?
A way to remove the obstruction would be to fit a remote reservoirs for the braking fluid. The only place i could fit it is below the master cylinder
Can a remote reservoir be fitted below the master cylinder? What effect would it have on the braking?
Or i could raise/ tilt the engine..
What would you do?
Thanks for your help
Jack
-
Martin
Which crimp tool is it?
Jack
-
The speed of a DC motor varies with the voltage supplied to the motor.
I would used a battery with a lower voltage or use a voltage regulator.
I have one f the speed regulator from a vry old Monster Beetle if you want .
Jack
-
hello
i have a plate with a magnetised plug on it, however i tend not to undo the plug.
i use one of those sucking pump to remove all the oil from the tank which works ver well.
i think Simon from "Meteor" may do them
jack
-
Redline had some...
Jack
-
It may only need lubrification
It's what I do on mine
Jack
-
I would think about £10.
I'll use DPD from work
Jack
-
Hi Rob
I have a set if you want, front and rear.
Yours for the cost of shipping or collections
I'm in Abingdon
Jack
-
Ok so it's a fuel or a fuel / air mixture issue.
What happen when you happen the throttle a little bit
Does it starts?
Can you disconnect the fuel supply to the TB and crank the engine.
Do you have fuel being pump out?
Jack
-
On my 21, K serie dry sump, after a oil change or a after the winter break, I poured a little amount of oil in the cylinder via the plug hole.
Crank the engine until i see oil pressure, fit the spark plugs and start the engine.
The oil burns making a nice white smoke which disappear very quickly
Jack
-
Thanks for the picture
I will have a look at it at the weekend
Jack
-
hello
I have tried to rotate the WASP to have the solenoid under the body but it didn't work
Would you still have the Brise adapter plate gathering dust in your garage?
I would like to move the solenoid as far away as possible from the primaries.
Cheers
Jack
-
Hello Mechanical Moz
Do you know if the adapter plate for the Brise would enable the coil to be fitted underneath the motor part of the starter?
Jack
Wanted: k series parts
in For Sale
Posted
Hello
I have juts tried again
Jack