Chris B.
-
Posts
194 -
Joined
-
Last visited
Never
Content Type
Profiles
Forums
Blogs
Events
Blatmaps
Speed Championship Results
News
Website Help
Downloads
Gallery
Store
Everything posted by Chris B.
-
Nice white 7, red stripes Preston Park 11.25 southbound waved from the top of my Tall Bike going north to get my 7 Regards Chris.
-
To clarify its two tickets for Sunday about £50.00 Ea, will deliver sussex area. Regards Chris.
-
Due to double booking I can't make Revival meeting on Sunday tickets were £112.00 any sensible offers ? Regards Chris
-
thicker ?
-
thanks shall blank them. regards Chris.
-
Hi All, When removing heater is it ok to just blank off port on water pump and inlet manifold or should they be joined with hose to keep water circulating ? Regards Chris.
-
YHM Regards Chris.
-
Bicycle type ones still avaiable in 3/8 and 9mm. Chris.
-
just been fiddling with my system. i cleaned rad cap both seals and applied silicone grease. hose is allready 45 degree with vent now it sucks water back into engine will test drive and see what happens. Chris.
-
Hi Mark, wondered what the reason is for changing to a sealed system is ? i have been having problems with water loss with no apparant leaks. Same reason ? Regards Chris.
-
Thanks David, got one Regards Chris.
-
Bit further away than Brighton getting a bit desperate now !! Regards Chris.
-
195/50x15 does not have to be a Pilot but the harder the better. regards Chris.
-
Wanted one Michelin pilot. have wheel but local tyre fitters havn't got s/h tyre only need a couple of mm for Dunsfold. Brighton area. Regards Chris.
-
Thanks Neil & Jack hopefully Neil will be closer to me have sent e mail to Neil. Regards& thanks Chris.
-
further afield may be ?
-
Require one Prisoner type wheel and Michelin pilot, tyre not essential, for Dunsfold so condition does not matter too much, Brighton sussex area. Regards Chris.
-
I presume its working correctly i would have thought you would have to bolt it down solid and have 50 psi or so to bend upper and lower tanks. The verticle tubes are usually wafer thin thats where i would expect problems to arrise first. the over flow/catch tank has water in it from time to time so cap must release at what pressure i dont know I dont know the history of the radiator so damage may of occured on day 1 in 1990 ! Regards Chris.
-
Any one have radiator as above for sale.must be usable ie no leaks Sussex area. Regards Chris.
-
Took my radiator in for repair yesterday for the third time, and have been informed it has been over pressurised, the top and bottom tanks do have a bow on them left to right. This causes any warranty to be void apparantly, allthough the tanks have allways been this shape. Two questions: how does a radiator over pressurise rad cap is not likely to jam? Does any one have crossflow/BD radiator for sale please Caterham ally one is quite different Regards Chris. Company will ring me tomorrow with cost of re core i think this might be mega money.
-
ygjgjkhlkh(javascript:insertAtCursor(document.postpage.message,%20' 😳')) iugiuhiuhk *mad*') try again. done it. done it again. Edited by - Chris B. on 23 Oct 2010 20:52:53 Edited by - Chris B. on 23 Oct 2010 20:55:35 Edited by - Chris B. on 23 Oct 2010 20:57:14 Edited by - Chris B. on 23 Oct 2010 21:04:26
-
tyres look fine i would even use the nail again!!!!! regards Chris.
-
Hi Guys I dont have master cut out switch,the alternator connections have been re made recently ( year ago) when i had a similar problem i wonder if corosion has got further into the alternator causing the problem i will look into that because the outside of the alternator has light corosion. Regards Chris.
-
Hi Willie, Coil is on the cold side of the engine and has been replaced leaving the same 5k missfire im almost sure damp corosion is causing the problem because its been outside for so long. Regards Chris.
-
Hi Richard, Thanks for the offer its back in the garage at the moment but its a bit like looking for a needle in a hay stack.thats why i wondered if there is a common damp/electrical problem Best Regards Chris.