Grindrod
-
Posts
23 -
Joined
-
Last visited
Content Type
Profiles
Forums
Blogs
Events
Blatmaps
Speed Championship Results
News
Website Help
Downloads
Gallery
Store
Everything posted by Grindrod
-
Look ok but located in London
-
Thanks I will take a look
-
Hi Wanted Half doors for S3 ( Not carbon or Carbon Vinyl ) Am located in North West so would prefer to view and pick up from this location. Thank you
-
Although I have not been out in 7 ( off road due to weather ) I have bought this kit ( along with shims for fitting mirrors to my aero screen ) . It is of very good quality .
-
Would be interested thanks
-
Oxted supply a kit ; the plastic back , bit of foam and some zip ties ; £61 must cost £1 to produce . so , looking for a used / discarded one first
-
Plastic back plate for standar s3 seat please. doesn’t need to be new just complete many thanks
-
Hi , re the boot bag ; the ad mentions 4” deep . Does it expand deeper ? if that makes sense . thanks
-
Hi thats interesting ; ECU mapping . I notice you mentioned you had a new ECU . I believe you can also have the original ECU mapped and can make a difference to engine characteristics . The transmission clunk isn't excessive , just annoying. Thanks Paul
-
Again , thanks to all. Seems to be a process of elimination until i can locate the culprit.
-
Very acute judging by the way mine reacts to opening the fridge door
-
No LSD , as far as I know . Thanks to all for your pointers.
-
Do they all do this ; Accelerating / decelerating ; I experience slight clunk/ snatch from somewhere along the drive train . Other than annoying , doesn't seem to affect performance . Is there a method of checking what this might be / Or do they all do this ? Car is 2003 1.6 K Seies Many thanks
-
Looking for suitable dog cage for my 7 looking through back issues of Low Flying ; June 2010 member Andy Wells produced / made one and looked quite good. does anyone have anything similar ? Thanks
-
Thank you all for all your replies . Andrew , I will have a look at your technical articles
-
Has anyone experience of mapping ; original MEMS 3 for K series ? There was an article in Low flying ; 2010 hi lighting a firm by name of Z and F Not sure if about any more as cant find them on internet Does anyone else offer this service / Not looking for power gains , just improved throttle response , better idling Cheers
-
Wanted knee trim panels ( both sides ) please for s3 Suit 2003 model Thank you
-
Hi maybe worth viewing the reply I received Re Throttle bodies ; Engine management system for a crossflow. maybe worth considering. thanks
-
Thanks for the reply/ info.
-
Hi , as a matter of interest; Is a throttle body conversion to a traditional carb fed crossflow a realistic / worthwhile venture . Advantages ? many thanks
