-
Posts
50 -
Joined
-
Last visited
Content Type
Profiles
Forums
Blogs
Events
Blatmaps
Speed Championship Results
News
Website Help
Downloads
Gallery
Store
Posts posted by LewisAV
-
-
Hi All
Getting desperate now and may have to buy new if i can find any. Don't care what type, Apollo or 8 spoke. But i need two for the weekend.
Many Thanks
Lewis
-
As per the subject let me know if you wish to part with one.
Lewis
-
We unplug the Lambda sensor from the Green plug underneath. The sensor was good according to easymap but just incase we tried in and out.
The temperature sensor is next to double check tomorrow, but again it didnt show up as bad in easymap.
appriciate the response
-
Hi All
When cold car runs fine. Once warm the car will stall. Checked so far.....
1. Air leaks/the three bungs. All good
2. TPS - Sitting at 4.2. All good
3. Lambda - All good
4. Earths - All good
5. Spark plugs & HT - All good
6. Idle position - All Good
Has anyone had the same issue or heard of this before.
Thanks in advance
Lewis
-
-
Hi All
First time entering the speed championship. Can anyone point me in the right direction for a timing strut please.
Thanks in advance
Lewis
-
Need for track day only so condition is not important as long as they are structurally sound.
Many Thanks
-
Hi all
Anyone have a set of 13x8inch wide rears for my S3.
Many Thanks
Lewis
-
Hi All
All Types Will be Considered. But ideally one with a tyre rack and a double axel like a BJT Minno. Cash waiting please get in contact via phone and send photos of the trailers as i am not always by a computer.
Many Thanks
Lewis 07398974951
-
Hi Adam
Thank you for the offer but i am not looking for leather. Going down the bead seat route.
Lewis
-
Not looking for leather. Its mainly for the track
-
Hi Stu
Yes the carbon and Kevlar are easy to spot the difference but i was asking about the GRP and composite. Both GRP (AKA Fiberglas) and composite are jet black so hard to tell.
Lewis
-
Hi All
I am thinking of putting my Tillet seats up for sale. First of two embarrassing questions. 1. How do i know if they are composite or Fiberglas? 2. How much roughly are these worth? Condition obviously being the key factor. New to the scene so learning as we go along.
Best Regards
Lewis
-
Hi Ed
Can you advise me a bit more regards the bench seat. What goes behind your back? The bech seats i have seen are just for your bum.
Lewis
-
Thank you. Will look into it
-
Hi All
I currently have tillett seats but unfortunately they are too uncomfortable for my passenger. Looking for a light seat with a bit more width. Will also be removing and installing on the odd occasion in the drivers position.
Any help and ideas or an item for sale would be great.
Many Thanks
Lewis
L3 / Class 3 specifications/Scrutineering documentation or detailed list.
in Speed
Posted
Hi
I know this has probably been sent out before or been requested before but can anyone help making sure my car is legal for entry on Class 3 on 1b tyres.
Best Regards
Lewis Carine