Smiffy555

I've used the electrical connector since I built it 15 months ago & 6k miles, all is well.

When I built my car I couldn't get the throttle cable to adjust as required and I did NOT want to start bending hollow tubing as it will 'kink' unless you bend it using a pipe bender. So I did as Jim 123 has suggested but I used one of these (link below)..........I cut off the 'nipple' off the cable and used one segment of the electrical connector - job done. https://uk.rs-online.com/web/p/products/7822816/?grossPrice=Y&cm_mmc=UK-PLA-DS3A-_-google-_-PLA_UK_EN_Connectors-_-Terminal_Blocks_And_DIN_Rail_Terminals-_-PRODUCT+GROUP&matchtype=&gclid=EAIaIQobChMIk8P_77WY2AIVTRDTCh0zjAOJEAQYASABEgJvV_D_BwE&gclsrc=aw.ds

This is the problem with running a track set up on the road, plus it makes the car very 'twitchy' at the front. Good service from BMTR, I've used them and they are a very helpful bunch.

After 2off 8x13" (Rear) Apollo Black / Diamond Cut wheels Please contact me if you have any to sell.

Hmm, ordered relatively early, received nowt. Emailed Josh, no reply!

Has anyone received theirs yet?

I'm after a boot bag for an SV chassis - if you have one and want to sell it then please let me know - I need it for a trip in July.

My 2016 car has 'up' bolts from the rear shocker mounts in to the bottom of the the standard roll bar.

......still looking.

Booked in with Northampton Motorsport.

Excellent, thank you all for the recommendations I'll get in touch with all 3 and see what availability they have.

Still looking..........

I know this is always a repetitive topic, but I'd like to get my SV set up to accommodate my manly figure. Could someone recommend anywhere in the Warwickshire area.....I'm very close to Warwick. Thanks.

as the title suggests, I'm after a trailer that will carry an SV