julian1
-
Posts
64 -
Joined
-
Last visited
Content Type
Profiles
Forums
Blogs
Events
Blatmaps
Speed Championship Results
News
Website Help
Downloads
Gallery
Store
Everything posted by julian1
-
Impressive - I might have a go Julian
-
Do these deflectors flap about much i.e do mirrors attached to them actually work? Presumably they just rest against the bodywork at the bottom - is it worth protecting the bodywork if thats the case? Thanks
-
Just found this thread - if anyone has a pair that they want to rehouse, please let me know. Cheers Julian
-
Hi Can anyone tell me how to remove the leather seat covers (back and bottom bit) on standard leather seats please? Thanks in advance Julian
-
I have a used crossflow cylinder head which I believe is a standard 1.3 judging by the valve sizes 38mm/31mm. It is Is it any use to anyone? cheers Julian Based near Leicester btw.
-
Hi I’ve got Nankangs in the soft compound and prefer them to my old ZV3’s. It isn’t much if a comparison I’m afraid but they seem to work. Yes a bit iffy in standing water but most things are I suspect if you don’t slow down a bit. You can definitely lean on them in the dry with confidence. 150bhp Roadsport by the way. Julian
-
After my timing belt woes I need the outer timing belt covers, lower and ideally upper. A) does anyone have some for sale? B) can anyone confirm the part numbers? I think the upper is LJR104770 and lower LRJ104350 or LJR104350L 1999 EU2 VVC don’t forget :) many thanks Julian
-
My bolt fell out last weekend and I'm still not sure how much damage it has caused. I would take the advice! Cheers Julian
-
The bolt fell out leading to everything else. I also expect there to be damage but thought I’d check just in case. Ever the optimist. If the head comes off it would be rude not to polish and port it don’t you think?
-
Thanks both Sounds like i could at least try plan A and see what happens.
-
Hello My crank pulley fell off at Rockingham last week allowing the cam belt to work its way through the cover and eventually fall off. It finally came off at idle after I had driven back to the paddock. I've had the covers off now and I can turn the inlet cam pulley through about 160 degrees by hand as though there is nothing connected to it. Is this normal or have I broken something inside the VVC bit? The exhaust cam turns as I would expect it to. I was hoping to time it up, pop the belt back on and if it turned ok by hand, do a compression test to see what might have happened inside. I don't fancy doing that yet until I understand this strange pulley behaviour. thanks in advance
-
Parts now ordered - thanks for your help
-
Thanks
-
Hi Can anyone confirm the correct bolts size to go into the main roll bar hoop from underneath (from near the top of the rear damper mount) please? Turns out mine are missing. 1999 imperial S3 - FIA single diagonal roll bar. Thanks Julian
-
Hi just checking that the front springs would fit std Bilsteins? If so are they still available? cheers Julian
-
PM sent :)
-
Hi do you still have the platforms? Cheers julian
-
Hi Wondered if the petty strut, clutch and throttle cable were available still? Cheers Julian
-
Ooo yes please - what condition are they in and what sort of price are you thinking? Cheers Julian
-
Thanks, I'll give them a shout.
-
Does anyone have a set of collars (adjustable spring platforms) to make my standard dampers adjustable for ride height? Thanks in advance Julian
-
Spotted in North Kilworth between Lutterworth and Market Harborough Tuesday morning at about 8.30. BTW your OS headlight is broken, showing sidelight only that side. Sorry I didn't wave but I was driving a Land Rover. Cheers
-
Spotted in North Kilworth between Lutterworth and Market Harborough Tuesday morning at about 8.30. BTW your OS headlight is broken, showing sidelight only that side. Sorry I didn't wave but I was driving a Land Rover. Cheers
-
Thanks everyone for the help. i changed the copper washers in the banjo union tonight and it all appears to be leak free so far. It needed to be pretty tight to stop fuel coming out but seems ok now. I'll keep my eye on it for a while. thanks again Julian
-
Hi Thanks for the post. Did your leak only when the engine is running or all the time? I guess it's a pump off job. One other thing, does the black plastic round bit that the wire goes into come off or is this part of the pump body that needs sealing (if it's the same problem as yours) thanks again
