andy99998

+1 For the bleed t piece valve off eBay, works really well.

+1 For the bleed t piece valve off eBay, works really well.

4-1 Exhaust for sale for a Rover engined Caterham, working order, only selling due to an upgrade..open to offers from club members on here, drop me a pm. ebay link here for reference: http://www.ebay.co.uk/itm/caterham-4-1-exhaust-Rover-K-Series-/253128498534?hash=item3aefa25d66:g:oy8AAOSwILFZqWjs

I was hearing good things about KBS rust seal, sounds like a similar kind of product....any comparisons?

Some of the powder coating on my chassis is starting to flake in a few areas, the rest is in good condition - its only a 2011 after all, just wondering if there is anything I can do to touch it up...I don't really want to wait for the day when surface rust has well and truly set in! Andy

Jonathan, Thanks for the reply - the battery is new (couple of months), went with thumb pressure and noted placement of bolts, what is the twisting method? I am assuming it is a straight forward as it sounds! Andy

Just replaced the alternator belt, reading over the battery is 13.1v before turn over 13.4 at idle and 13.8 at few thousand revs - is that about expected? Thanks, Andy

Thanks! Have dropped you a message :-)

Probably a real simple question...but can anyone remember which bolts are for the protection eyebrow on the battery master switch...?? Andy

On the point of aeroscreens, I would for sure, they are easy to take on and off once you get used to it, I got 7 chips in my windscreen at my last track day....it's an extreme and freak example and plenty of people have been just fine, but i would now rather take it out of the equation altogether, plus it feels so much quicker and exciting :-D Helmets, I would get your own..you can wear it home with the aeroscreens then...but no need for overalls, although I wear driving shoes and gloves. Hope that helps :-)

That's interesting, I have as you say 185/60 fronts and 205/60 rears, so I'll try dropping it a bit all round, thanks for the suggestions :-)

Bought 4 off eBay for £7 for mine, well worth it and all OE

13" for road use and occasional track days, I set them at 20 psi all round for now

Just wondering what pressures anyone with Toyo r888's are running at?

I use this stuff, good oil...no complaints :-)