PROBE2

Hi, looking for a centre pad for Momo steering wheel

thanks

Paul

Thanks Doug, looking to install full heater 

Hi, looking for a heater, either older type with ‘7’ on casing or new more rounder type.

thanks 

Paul

I’ll take one also Dave, cheers Paul

Hi 

looking for a bonnet and scuttle with holes for wipers and spray for RHD S3, new or as new condition.

Thanks

Paul

Hi, looking for paint code for Krypton Green please, is this the same colour as used on the Lotus exige?

thanks

Paul

Hi, looking for 2 good CR500 195/45/15 tyres, 4mm+ tread.

Located near Bedford.

Cheers

Paul

Thanks all for info

Hi, looking for a on/off toggle switch for fan override to match existing 2004 S3 toggle switches, Caterham don’t appear to stock on/off anymore.

one lurking in spares box?

cheers

Paul

Hi, I just had one done at TSK Dartford, original sprayers, good price and Tony top guy. 

Cheers

Paul

Many thanks  for link, Paul

I would suggest Comma following Rover recommendation, Green up to 2002 then OAT/G30 onwards.

Anymore info on Radtec problems with OAT pink, as that’s what I am running?

David, will send you private message if that’s ok, Paul

Hi David, yes still available, near Bedford.

Paul

Hi Phil

I see you are running 285H cams, which I understood make best power at c7500rpm? have you intentionally set rpm low to protect pistons or once injectors changed you will extend rev range?

look good numbers at 7000rpm.

Cheers

Paul

Hi

Lowered floors with support brackets, driver and passenger for metric S3, good condition

£225

thanks

Paul

Rupert, I have one, PM sent

Radtec are advertising rads on eBay so likely have stock?

hope you get sorted soon.

By way sent you PM on shims for K series head if you still have them

cheers

Paul

Simon, PM sent

Is that a new radtec radiator? Sorry to hear that, I bought one same time as you so will check mine in particular around the temp switch 

Thanks Andrew, space in mailbox now

Thanks Ian and Andrew

i am going to give it one more go, bleed system, new cap, hole in thermostat (thanks Stu, no hole at moment) and ensure valve on inlet clear. May also exclude heater for now to isolate that as an issue.

if not I am due an engine upgrade so head off it is then!

Regards

Paul

Hi

Following a change to radtec radiator having a challenge getting K series Caterham cooling system operating properly

Issue is after 20 mins drive and once full revs applied coolant blows out of hoses around heater and traces around expansion cap. Hose from heater to water rail particularly hot, Otherwise all looks ok.

- no symptoms or issues before radiator change

- appears NO water in oil or oil in water 

- car runs up to temperature fine

- radiator top and bottom hose get hot, doesn’t appear air lock

- fan kicks in fine

appears system is pressurised and not relieving and finding weakest point, maybe just need new expansion cap?

welcome any thoughts/experiences please

cheers

Paul

Thanks all for comments, they do come up from time to time when moving to even larger inlets. For one of those longer term projects so no rush and if needs be will buy new if no availability.

Thanks again

Hi, long shot, has anyone got any surplus 32.5mm inlet and 28.5mm exhaust valves for K Series VVC Head?

Thanks

Paul