noddy Posted August 5, 2005 Share Posted August 5, 2005 Can someone near to Uckfield weld or braze a cut down mirror stem onto an exhaust clamp for me? ........ Any takers please, R400 .......... I love it Link to comment Share on other sites More sharing options...
DohNut Posted August 5, 2005 Share Posted August 5, 2005 No but you could try threading the stem and bolting it on, a tap and die set is only a tenner. 😬 Link to comment Share on other sites More sharing options...
elie boone Posted August 5, 2005 Share Posted August 5, 2005 Can't u weld a bolt on the clamp and drill & tap some tread into the stem ? Link to comment Share on other sites More sharing options...
Foxy Smith Posted August 5, 2005 Share Posted August 5, 2005 Noddy, I've got welding and brazing kit here but to be honest I reckon a mechanical fastening will be the answer. No doubt the clamp will be galvanised or worse, any idea what the mirror stem is made from? If you want a hand I'm around Sat afternoon and Sun afternoon. I'm just down the hill from John Howe at Highbrook near Ardingly (01444 892555) Link to comment Share on other sites More sharing options...
Mickrick Posted August 6, 2005 Share Posted August 6, 2005 Wont the wing mirror be a bit low on your exhaust 😬 Only kidding Link to comment Share on other sites More sharing options...
Graham Perry Posted August 6, 2005 Share Posted August 6, 2005 Careful that the stem is not aluminium as I discovered to my cost when we tried to do ours, and I ended up having to take it to a friend who could weld ali. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now