Ade Ray Posted April 14, 2005 Share Posted April 14, 2005 For sale, the following: Xflow 711 block bored by Roger King to 83.5 with water pump. Block number KD 2525 GS £200.00 cast iron big end caps for same £40.00 Roger King Gas flowed head for same with valves, double springs etc. £200.00 Twin 40 Webbers with manifold for above £200 New 244 cam from kent Cams still sealed in oil bag and boxed. Comes with new set of cam followers £80.00 Original oil pump £15.00 Original fuel pump £5.00 Lucas side exit Dizzy with gear for above £65.00 Lucas AB14 electronic ignition kit with coil £40.00 4x Acralite piston heads, machined by R. King for the 244 cam, all with gudgeon pins, 3 with cast iron pistons £70.00 Duplex timing gear for Xflow including two cogs, chain and oil slinger £35.00 Rocker set with steel posts, shaft and spacers £50 Double dowelled flywheel and clutch assembly minus cabling £50.00 Sparco twin layer racing overalls in Red with blue piping. RS 006.01, Standard 8856-2000 manufactured 2002,size 62 (I'm 6'2 and was 15 stone when i bought this) worn twice.In Sparco bag. £50 Any more info required please email me. Cheers Ade Link to comment Share on other sites More sharing options...
Bemeco Posted April 15, 2005 Share Posted April 15, 2005 Hello I will bye the following part "Roger King Gas flowed head for same with valves, double springs etc. £200.00" Mail pictures, close ups on the porting. Is it a head that need reabuild? crack tested? is it leadfree? size of valves. How many hps was the engine producing? Freight via Parcel2go (£30 VAT included, up to 25kg) Prompt payment via Paypal? / Bengt Metz bengt.metz@tele2.se Bengt Metz +4640546729 bengt.metz@tele2.se Link to comment Share on other sites More sharing options...
Peter T Posted April 15, 2005 Share Posted April 15, 2005 Are you selling the block with steel caps then ??? And do you not mean main caps ? Carbon Components from K9 Composites Link to comment Share on other sites More sharing options...
George Tait Posted April 15, 2005 Share Posted April 15, 2005 Ade, Grateful if you could give me more details on the carbs and manifold. If they are good condition, suitable for a std 1600x/flow with the correct manifold I'd like first refusal. I'm out for the rest of the day but will pick up my emails later this evening. Regards, George Link to comment Share on other sites More sharing options...
Ade Ray Posted April 15, 2005 Author Share Posted April 15, 2005 Hi Bemeco The head is in fine condition, and does not need rebuilding. it has had the unleaded conversion. The engine produced 155 BHP when running. Will get you some pics as soon as poss. Dont know the valve sizes but a query if possible to Roger King quoting the engine block number might answer that quetion. Peter I do mean main caps and they are cast iron with the dowell for the duplex timing gear. GeeTee The manifold is for a standard 1600 Xflow which the engine was originally. I will try and get a part number off the manifold if I can. Link to comment Share on other sites More sharing options...
Peter T Posted April 15, 2005 Share Posted April 15, 2005 Trying to sell a block without matching main caps is going to be hard to shift mate, i would not buy a block without them , it's not so much the cost of using steel ones ( about £135 ) but the cost is about the same to have it line bored and checked. Carbon Components from K9 Composites Link to comment Share on other sites More sharing options...
Ade Ray Posted April 16, 2005 Author Share Posted April 16, 2005 Peter I do not Know what you mean, the parts are all from this engine as it was modified by Roger King. I have simply separated them out on a price basis. Ade Link to comment Share on other sites More sharing options...
Peter T Posted April 16, 2005 Share Posted April 16, 2005 Yes, i understand that, but you should have priced the block with the caps, both are almost worthless alone. 711M blocks are very cheap to buy. Carbon Components from K9 Composites Link to comment Share on other sites More sharing options...
Ade Ray Posted April 16, 2005 Author Share Posted April 16, 2005 I am happy to include the caps in the sale at £200 if that makes them more marketable, its no big deal from my point of view. I have to see I have not seen many 711M blocks available and to try and get anything from say Burton power costs an arm and a leg. I think the attraction of this block is that it has been bored out By RK to the larger size, saving some expense if the a bored out block is what you want. Cheers Ade Link to comment Share on other sites More sharing options...
Ade Ray Posted April 16, 2005 Author Share Posted April 16, 2005 I now have photos available for most of the bits Im selling. Im not sure how I could get them onto blatchat but anyone wanting to see pics can email me and i will send them off. Cheers Ade Link to comment Share on other sites More sharing options...
George Tait Posted April 16, 2005 Share Posted April 16, 2005 Ade, I'm not sure of your email address so grateful if you could send me pictures of the carbs and manifold at taitfamily@ntlworld.com. Incidentally are the carbs a matched pair? Many thanks. George Link to comment Share on other sites More sharing options...
Gary Drew Posted April 16, 2005 Share Posted April 16, 2005 Hi, I'd like first dibs on the 4 Accralite pistons + gudgeon pins for £70. YHM, so pls mail me back with details of your location and maybe a contact phone no. Rgds Gary Sussex garydrew@ntlworld.com Edited by - Gary Drew on 16 Apr 2005 14:14:54 Link to comment Share on other sites More sharing options...
alfred Posted April 16, 2005 Share Posted April 16, 2005 thanks ade, whole lot bought by me as agreed Alfred Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now