Tony C Posted March 15, 2005 Share Posted March 15, 2005 I've noticed lately whilst pushing my 7 back into the garage a slight clinking from the front nearside. I didn't pay too much attention, thinking it was the usual brake pad rubbing on the disk and clinking on the hold-in pins. Had a closer look tonight and the noise turned out to be the wheel bearing dust seal fallen out and clinking inside the plastic centre cap on the Minator. I should have used a bigger hammer! No big, but somewhere to check if you have a similar clink 😬 BRG Brooklands SV 😬 It seems that perfection is achieved not when there is nothing more to add, but when there is nothing more to take away. (Antoine de Saint-Exupery) Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now