Bedazzled Posted February 19, 2005 Share Posted February 19, 2005 Is it a simple DIY job to adjust the rear ARB on an R300, or do I need special tools? Does it require any brute force or do you just undo the bolts and move it? Does it make much difference to the handling? It's currently on the second to softest setting and I'd like to try one notch stiffer to get a bit more oversteer. Thanks in advance! Link to comment Share on other sites More sharing options...
Stuart Faulds Posted February 20, 2005 Share Posted February 20, 2005 It's simple - you'll need a slim 11mm spanner between the bar and knuckle, and a 1/2" on the other side. It can make a big difference to the handling depending on how the the suspension is setup. Link to comment Share on other sites More sharing options...
puremalt Posted February 20, 2005 Share Posted February 20, 2005 Won't you get more oversteer on the softest setting? This one goes up to 11 Link to comment Share on other sites More sharing options...
Chelspeed Posted February 20, 2005 Share Posted February 20, 2005 Nope. Stiffer rear bar - more oversteer. Link to comment Share on other sites More sharing options...
csedgwick Posted February 20, 2005 Share Posted February 20, 2005 Fitting mine this week. Like the sound of more oversteer 😬 😬 😬 Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now