Strangely Posted February 9, 2005 Share Posted February 9, 2005 On the "Idle control" tab of the Emerald Windows software (1.1r7), there's a field to configure the "Update rate", but the field isn't documented in the latest manual. Anyone know what it does? Does it actually do anything? Curiously yours, Jason. Link to comment Share on other sites More sharing options...
Jason Plato Posted February 9, 2005 Share Posted February 9, 2005 It enables an authorsed user to alter the rate at which updates are performed to the ecu idle control . If you alter it it can either update more or less to maintain idle control . If adjusted too far then idle will not be controlled . All very standard stuff 😬 Dave Link to comment Share on other sites More sharing options...
Strangely Posted February 9, 2005 Author Share Posted February 9, 2005 Thanks, Dave. Which way is up? i.e. if I reduce the number will the updates (potentially) occur more frequently (or less...)? Link to comment Share on other sites More sharing options...
oilyhands Posted February 9, 2005 Share Posted February 9, 2005 Set it to 10, that'll do it, otherwise it'll 'hunt'. Oily Link to comment Share on other sites More sharing options...
Strangely Posted February 9, 2005 Author Share Posted February 9, 2005 Erm, OK Dave . It was set to 10 before I started mucking about, but I didn't notice any difference (I only changed it by 2 or 3 up or down). Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now