Bemeco Posted May 8, 2003 Share Posted May 8, 2003 Hello out there Is it posible to modify the originaloilpump on the X-flowengine to bee a highpresure type instead of buing a new one. Re Bengt Metz bengt.metz@bemeco.se Bengt Metz +46546729 bengt.metz@bemeco.se Link to comment Share on other sites More sharing options...
Big Brother Posted May 8, 2003 Share Posted May 8, 2003 Yes, it can be "modified" by increasing the strength of the pressure relief valve. However.... Most tuning companies recommend high capacity over high pressure. These pumps tend to have a larger (deeper) end section (furthest end from the engine) They are approx £40.00 GBP Take a look here There are a couple of photos of the pressure relief assembly The site is in French but Google can be used to translate the text if needed. Steve Se7en-Up! Less is more! Remember - an Amateur built the Ark - It took Professionals to build the Titanic! Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now