Jump to content
Click here if you are having website access problems ×

Flowrate of R400 / 500 injectors??

Bob Corb

Recommended Posts

I'm going to be mapping a VHPD engine fitted with MBE967 EMS soon but the engine has the beige Rover EU2 injectors and old style SLR manifold .


I've got an old map from an R400 racer (with roller barrels) but the injectors appear to be far too big as the max duty cycle is only around 50%. I guess they are the same units as fitted to the R500. In order for me to be able to generate a desktop calibration I need to find out the flowrate (and pressure at the rated flow) of the R500 injectors, I'll then have to make a few assumptions for dead band time but it will at least give me a better starting point.


Thanks in advance.



Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Create New...